The Large Interferometer For Exoplanets (LIFE) is a proposed space mission that enables the spectral characterization of the thermal emission of exoplanets in the solar neighborhood. The mission is designed to search for global atmospheric biosignatures on dozens of temperate terrestrial exoplanets and it will naturally investigate the diversity of other worlds. Here, we review the status of the mission concept, discuss the key mission parameters, and outline the trade-offs related to the mission’s architecture. In preparation for an upcoming concept study, we define a mission baseline based on a free-formation flying constellation of a double Bracewell nulling interferometer that consists of 4 collectors and a central beam-combiner spacecraft. The interferometric baselines are between 10–600m, and the estimated diameters of the collectors are at least 2m (but will depend on the total achievable instrument throughput). The spectral required wavelength range is 6–16μm (with a goal of 4–18.5μm), hence cryogenic temperatures are needed both for the collectors and the beam combiners. One of the key challenges is the required deep, stable, and broad-band nulling performance while maintaining a high system throughput for the planet signal. Among many ongoing or needed technology development activities, the demonstration of the measurement principle under cryogenic conditions is fundamentally important for LIFE.
The METIS instrument (Mid-infrared ELT Imager and Spectrograph) is one of the three first-light instruments for the ELT. It will work in the mid-infrared with a set of four different focal planes, grouped in three different subsystems: the imager (IMG) and the spectrograph (LMS) are the two scientific focal planes, and the last one, SCAO, is the dedicated adaptive optics system. In total, this instrument requires five H2RG detectors (5.3μm cutoff), one SAPHIRA detector (2.5μm) and one GEOSNAP (13.5μm). All of these detectors will be controlled by the New General Controller, second generation (NGCII). These three separate subsystems require specific tests and development : the IMG needs a fast readout for both N and LM channels, the LMS requires a mosaic of four detectors and SCAO works with one single detector operated fast for AO corrections. In this paper, we will present the challenges for the development of the detector systems of the three detector subunits in METIS. This includes the design, tests and preparations for the AIT/AIV phases that each subsystem has to go through. First, we describe the detector-specifics of all the instruments. In a second part, we go over the design challenges for these detector subunits. In the end, we will report on the current testing.
New longwave HgCdTe detectors are critical to upcoming plans for ground-based infrared astronomy. These detectors, with fast-readouts and deep well-depths, will be key components of extremely large telescope instruments and therefore must be well understood prior to deployment. We analyze one such HgCdTe detector, a Teledyne Imaging Sensors GeoSnap, at the University of Michigan. We find that the properties of the GeoSnap are consistent with expectations from analysis of past devices. The GeoSnap has a well-depth of 2.75 million electrons per pixel, a read noise of 360e-/pix, and a dark current of 330,000 e-/s/pix at 45K. The device experiences 1/f noise which can be mitigated relative to half-well shot noise with modest frequency image differencing. The GeoSnap’s quantum efficiency is calculated to be 79.7 ± 8.3% at 10.6 microns. Although the GeoSnap’s bad pixel fraction, on the order of 3%, is consistent with other GeoSnap devices, close to a third of the bad pixels in this detector are clustered in a series of 31 ”leopard” spots spread across the detector plane. We report these properties and identify additional analyses that will be performed on future GeoSnap detectors.
We present the concept for STARI: STarlight Acquisition and Reflection toward Interferometry. If launched, STARI will be the first mission to control a 3-D CubeSat formation to the few mm-level, reflect starlight over 10s to 100s of meters from one spacecraft to another, control tip-tilt with sub-arcsecond stability, and validate endto-end performance by injecting light into a single-mode fiber. While STARI is not an interferometer, the mission will advance the Technology Readiness Levels of the essential subsystems needed for a space interferometer in the near future.
The Mid-Infrared ELT Imager and Spectrograph (METIS) will be one of only three 1st-generation science instruments on the 39m Extremely Large Telescope (ELT). METIS will provide diffraction-limited imaging and medium resolution slitspectroscopy from 3–13 microns (L, M, and N bands), as well as high resolution (R≈100,000) integral field spectroscopy from 2.9–5.3 microns. Both imaging and IFU spectroscopy can be combined with coronagraphic techniques.
After the final design reviews of the optics (2021) and the entire system (2022), most hardware procurements have started. In this paper we present an overview of the status of the various ongoing activities. Many hardware components are already in hand, and the manufacturing is in full swing in order to start the assembly and testing of the subsystems in 2024 toward first light at the telescope in 2028/29. This rather brief paper only provides an overview of the project status. For more information, we refer to the detailed instrument paper which will be published soon.
HARMONI is the first light visible and near-IR integral field spectrograph for the ELT. It covers a large spectral range from 450 nm to 2450 nm with resolving powers from 3500 to 18000 and spatial sampling from 60 mas to 4 mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews. HARMONI is a work-horse instrument that provides efficient, spatially resolved spectroscopy of extended objects or crowded fields of view. The gigantic leap in sensitivity and spatial resolution that HARMONI at the ELT will enable promises to transform the landscape in observational astrophysics in the coming decade. The project has undergone some key changes to the leadership and management structure over the last two years. We present the salient elements of the project restructuring, and modifications to the technical specifications. The instrument design is very mature in the lead up to the final design review. In this paper, we provide an overview of the instrument's capabilities, details of recent technical changes during the red flag period, and an update of sensitivities.
The Mid-Infrared ELT Imager and Spectrograph (METIS) is one of the first generation science instruments on ESO's 39m Extremely Large Telescope (ELT). METIS will provide diffraction-limited imaging and medium resolution slit-spectroscopy from 3 – 13 microns (L, M, and N bands), as well as high resolution (R ~ 100,000) integral field spectroscopy from 2.9 – 5.3 microns. After passing its preliminary design review (PDR) in May 2019, and the final design review (FDR) of its optical system in June 2021, METIS is now preparing for the FDR of its entire system in the fall of 2022, while the procurements of many optical components have already started. First light at the telescope is expected in 2028, after a comprehensive assembly integration and test phase. We describe the conceptual setup of METIS, its key functional components, and the resulting observing modes. Last but not least, we present the expected sensitivity, adaptive optics, and high contrast imaging performance.
HARMONI is the first light, adaptive optics assisted, integral field spectrograph for the European Southern Observatory’s Extremely Large Telescope (ELT). A work-horse instrument, it provides the ELT’s diffraction limited spectroscopic capability across the near-infrared wavelength range. HARMONI will exploit the ELT’s unique combination of exquisite spatial resolution and enormous collecting area, enabling transformational science. The design of the instrument is being finalized, and the plans for assembly, integration and testing are being detailed. We present an overview of the instrument’s capabilities from a user perspective, and provide a summary of the instrument’s design. We also include recent changes to the project, both technical and programmatic, that have resulted from red-flag actions. Finally, we outline some of the simulated HARMONI observations currently being analyzed.
We present the fifth incarnation of the Mid-Infrared Array Camera (MIRAC-5) instrument which will use a new GeoSnap (3 – 13 microns) detector. Advances in adaptive optics (AO) systems and detectors are enabling ground based mid-infrared systems capable of high spatial resolution and deep contrast. As one of the only 3 – 13 micron cameras used in tandem with AO, MIRAC-5 will be complementary to the James Webb Space Telescope (JWST) and capable of characterizing gas giant exoplanets and imaging forming protoplanets (helping to characterize their circumplanetary disks). We describe key features of the MIRAC-5 GeoSnap detector, a long-wave Mercury-Cadmium-Telluride (MCT) array produced by Teledyne Imaging Sensors (TIS), including its high quantum efficiency (> 65%), large well-depth, and low noise. We summarize MIRAC-5’s important capabilities, including prospects for obtaining the first continuum mid-infrared measurements for several gas giants and the first 10.2-10.8 micron NH3 detection in the atmosphere of the warm companion GJ 504b (Teff ~ 550 K) within 8 hours of observing time. Finally, we describe plans for future upgrades to MIRAC-5 such as adding a coronagraph. MIRAC5 will be commissioned on the MMT utilizing the new MAPS AO system in late 2022 with plans to move to Magellan with the MagAO system in the future.
The direct characterization of exoplanetary systems with high contrast imaging is among the highest priorities for the broader exoplanet community. As large space missions will be necessary for detecting and characterizing exo-Earth twins, developing the techniques and technology for direct imaging of exoplanets is a driving focus for the community. For the first time, JWST will directly observe extrasolar planets at mid-infrared wavelengths beyond 5 μm, deliver detailed spectroscopy revealing much more precise chemical abundances and atmospheric conditions, and provide sensitivity to analogs of our solar system ice-giant planets at wide orbital separations, an entirely new class of exoplanet. However, in order to maximise the scientific output over the lifetime of the mission, an exquisite understanding of the instrumental performance of JWST is needed as early in the mission as possible. In this paper, we describe our 55-hour Early Release Science Program that will utilize all four JWST instruments to extend the characterisation of planetary mass companions to ∼15-20 μm as well as image a circumstellar disk in the mid-infrared with unprecedented sensitivity. Our program will also assess the performance of the observatory in the key modes expected to be commonly used for exoplanet direct imaging and spectroscopy, optimize data calibration and processing, and generate representative datasets that will enable a broad user base to effectively plan for general observing programs in future cycles.
KEYWORDS: James Webb Space Telescope, Data processing, Image processing, Human-computer interaction, Exoplanets, Planets, Point spread functions, Control systems, Coronagraphy, Environmental sensing
The JamesWebb Space Telescope (JWST) will probe circumstellar environments at an unprecedented sensitivity. However, the performance of high-contrast imaging instruments is limited by the residual light from the star at close separations (<2-3"), where the incidence of exoplanets increases rapidly. There is currently no solution to get rid of the residual starlight down to the photon noise level at those separations, which may prevent some crucial discoveries. JWST's launch is planned for October 2021 with a planned baseline science mission lifetime of only five years. Thus, it is crucial to start developing a solution to this problem before its launch. We are investigating an innovative approach of post-processing built on a Bayesian framework that provides a more robust determination of faint astrophysical structures around a bright source. This approach uses a model of high-contrast imaging instrument that takes advantage of prior information, such as data from wavefront sensing (WFS) operations on JWST, to estimate simultaneously instrumental aberrations and the circumstellar environment. With this approach, our goal is to further improve the contrast gain over the contrast that can be achieved with JWST instruments, starting with NIRCam direct imaging and coronagraphic imaging. This work will pave the way for the future space-based high-contrast imaging instruments such as the Nancy Grace Roman Space Telescope_ Coronagraph Instrument (Roman CGI). This technique will be crucial to make the best use of the telemetry data that will be collected during the CGI operations.
HARMONI is the adaptive optics assisted, near-infrared and visible light integral field spectrograph for the Extremely Large Telescope (ELT). A first light instrument, it provides the work-horse spectroscopic capability for the ELT. As the project approaches its Final Design Review milestone, the design of the instrument is being finalized, and the plans for assembly, integration and testing are being detailed. We present an overview of the instrument’s capabilities from a user perspective, provide a summary of the instrument’s design, including plans for operations and calibrations, and provide a brief glimpse of the predicted performance for a specific observing scenario. The paper also provides some details of the consortium composition and its evolution since the project commenced in 2015.
We introduce the Michigan Infrared Test Thermal ELT N-band (MITTEN) Cryostat, a new facility for testing infrared detectors with a focus on mid-infrared (MIR) wavelengths (8-13 microns). New generations of large format, deep well, fast readout MIR detectors are now becoming available to the astronomical community. As one example, Teledyne Imaging Sensors (TIS) has introduced a long-wave Mercury-Cadmium-Telluride (MCT) array, GeoSnap, with high quantum efficiency (< 65 %) and improved noise properties compared to previous generation Si:As blocked impurity band (BIB) detectors. GeoSnap promises improved sensitivities, and efficiencies, for future background-limited MIR instruments, in particular with future extremely large telescopes (ELTs). We describe our new test facility suitable for measuring characteristics of these detectors, such as read noise, dark current, linearity, gain, pixel operability, quantum efficiency, and point source imaging performance relative to a background scene, as well as multiple point sources of differing contrast. MITTEN has an internal light source, and soon an accompanying filter wheel and aperture plate, reimaged onto the detector using an Offner relay. The baseline temperature of the cryostat interior is maintained is < 40 K and the optical bench maintains a temperature of 16 K using a two-stage pulse-tube cryocooler package from Cryomech. No measurable background radiation from the cryostat interior has yet been detected.
The TIKI instrument is a next generation 10-micron cryogenic extreme adaptive optics (ExAO) imager being designed for the Gemini South telescope. Its goal is to detect the thermal emission of Earth-like planets in orbit around Alpha Centauri A or B. TIKI is also a prototype for future TMT instruments capable of imaging Earth- like planets around a larger star sample, and performing low spectral resolution characterization to search for biomarkers on detected planets. The science module will operate at cryogenic temperature in order to minimize thermal background, dominant in the 10-micron wavelength range. The instrument will use Adaptive Optics, a vortex coronagraph, focal plane wavefront sensing, and advanced post-processing techniques to reach a 1E-7 contrast in less than 200 hours of observing time. It aims to be background-limited in the 2-5λ/D zone, which corresponds to the habitable zone around the two Sun-like stars of the Alpha Centauri system. In this paper, we give an overview of the project goals, present TIKI's conceptual optical design, and summarize preliminary simulation results.
With the imminent launch of the JWST, the field of thermal-infrared (TIR) astronomy will enjoy a revolution. It is easy to imagine that all areas of infrared (IR) astronomy will be greatly advanced, but perhaps impossible to conceive of the new vistas that will be opened. To allow both follow-up JWST observations and a continuance of work started on the ground-based 8m’s, we continue to plan the science cases and instrument design for a TIR imager and spectrometer for early operation on the TMT. We present the current status of our science cases and the instrumentation plans, harnessing expertise across the TMT partnership. This instrument will be proposed by the MICHI team as a second-generation instrument in any upcoming calls for proposals.
We present results from a cryogenic characterization of the grating vector Apodizing Phase Plate (gvAPP) coro- nagraph that will be used in the upcoming instrument ERIS (Enhanced Resolution Imager and Spectrograph) at the VLT. ERIS consists of a 1-5 μm imager (NIX) and a 1 2.5 μm integral field spectrograph (SPIFFIER), both fed by the Adaptive Optics Facility of UT4 to yield diffraction-limited spatial resolution. A gvAPP coronagraph will be included in the NIX imager to enable high-contrast imaging observations, which will be particularly powerful for the direct imaging of exoplanets at L and M bands (~3-5 μm) and will compliment the current capabilities of VLT/SPHERE and surpass the capabilities of VLT/NACO. We utilize the near-infrared test bench of the Star and Planet Formation group at ETH Zurich to measure key properties of the gvAPP coronagraph at its operating wavelengths and under the vacuum/cryogenic (~70 K) conditions of the future ERIS instrument.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.