Mr. Hiroki Tadatomo Profile

Hiroki Tadatomo

at Tokyo Electron limited

SPIE Involvement:

Author

Publications (3)

Proceedings Article | 25 May 2022 Poster + Presentation + Paper

Approaches to enable patterning of tight pitches towards high NA EUV

Hiroki Tadatomo, Arnaud Dauendorffer, Tomoya Onitsuka, Hisashi Genjima, Yasuyuki Ido, Soichiro Okada, Yuhei Kuwahara, Arisa Hara, Congque Dinh, Seiji Fujimoto, Shinichiro Kawakami, Makoto Muramatsu, Satoru Shimura, Kathleen Nafus, Noriaki Oikawa, Kenta Ono, Yannick Feurprier, Marc Demand, Ainhoa Romo Negreira, Seiji Nagahara, Blanco Victor, Philippe Foubert, Danilo De Simone

Proceedings Volume 12056, 120560F (2022) https://doi.org/10.1117/12.2614012

KEYWORDS: Etching, Optical lithography, Extreme ultraviolet, Bridges, Extreme ultraviolet lithography, Inspection, Image processing

Read Abstract +

Extreme ultraviolet (EUV) lithography has been used for mass production for several years. Now the resolution limit of current 0.33 NA single exposure has been approaching. To enhance the resolution limit, high NA exposure tool has been developing. At the limit, not only the stochastic failures1, but also patterning trade-off has been becoming challenging. In this paper, to overcome the patterning trade-off of LS and CH, several approaches were demonstrated for both CAR and MOR. As for chemically amplified resist (CAR), to overcome the patterning trade-off of line and space, two different approaches were demonstrated. One was a developer rinse process optimization, and the other was a top deposition treatment during etching process. By using the two approaches, pitch 24 nm LS patterns were successfully transferred. As to CAR CH patterning, a new shrink technique during etch process was successfully tested for sub 15 nm hole patterning. No missing hole detected at 12 nm hole size by voltage contrast metrology. For tighter nodes, spin-on metal oxide resist (MOR) have been considering to be used because it offers a series of advantages. It has high sensitivity and resolution because of its high photon absorption and simple reaction mechanism. It also inherently has a higher etch resistance which enables resist thickness thinner and collapse margin higher. Spin-on process of MOR is expect to contribute high productivity which is essential for high volume manufacturing (HVM). Because defect reduction is one of the key points to enable MOR process for HVM, continuous investigation of defect mitigation has been done. For pitch 32 nm LS, the mitigation was confirmed by fine optimization with the combination of the etch process and the implementation of new under layers. As to pitch 28nm line and space, optimized illumination gave better defect process windows. Moreover, a new wet developer process was successfully proposed to prevent pitch 36 nm hexagonal pillars collapse during wet development with 25% higher EUV sensitivity.

Proceedings Article | 28 September 2021 Presentation

Addressing EUV patterning challenges towards the limits of NA 0.33 EUV exposure

Arnaud Dauendorffer, Tomoya Onitsuka, Hiroki Tadatomo, Keisuke Yoshida, Takahiro Shiozawa, Hisashi Genjima, Noriaki Nagamine, Yuya Kamei, Soichiro Okada, Shinichiro Kawakami, Makoto Muramatsu, Satoru Shimura, Kathleen Nafus, Noriaki Oikawa, Yannick Feurprier, Marc Demand, Ainhoa Romo Negreira, Seiji Nagahara, Congque Dinh, Luka Kljucar, Danilo De Simone, Philippe Foubert

Proceedings Volume 11854, 118540B (2021) https://doi.org/10.1117/12.2600860

KEYWORDS: Extreme ultraviolet lithography, Optical lithography, Metals, Etching, Stochastic processes, Semiconductors, Semiconductor manufacturing, Resistance, Photomasks, Particles

Read Abstract +

Proceedings Article | 20 September 2020 Presentation

Improvement of EUV processes for high volume manufacturing

Makoto Muramatsu, Hiroki Tadatomo, Tomoya Onitsuka, Keisuke Yoshida, Arnaud Dauendorffer, Takahiro Shiozawa, Soichiro Okada, Shinichiro Kawakami, Satoru Shimura

Proceedings Volume 11517, 115170M (2020) https://doi.org/10.1117/12.2572637

KEYWORDS: Extreme ultraviolet, High volume manufacturing, Etching, Extreme ultraviolet lithography, Lithography, Semiconductors, Photomasks, Stochastic processes, Liquids, Photoresist processing

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years