Impact of EUV photomask line-edge roughness on wafer prints

Zhengqing John Qi; Emily Gallagher; Yoshiyuki Negishi; Gregory McIntyre; Amy Zweber; Tasuku Senna; Satoshi Akutagawa; Toshio Konishi

doi:10.1117/12.976855

8 November 2012 Impact of EUV photomask line-edge roughness on wafer prints

Zhengqing John Qi, Emily Gallagher, Yoshiyuki Negishi, Gregory McIntyre, Amy Zweber, Tasuku Senna, Satoshi Akutagawa, Toshio Konishi

Author Affiliations +

Proceedings Volume 8522, Photomask Technology 2012; 85222H (2012) https://doi.org/10.1117/12.976855
Event: SPIE Photomask Technology, 2012, Monterey, California, United States

Abstract

The line-edge roughness (LER) of a photomask image has a measurable impact on the corresponding printed wafer LER. This impact increases as wafer exposures move from 193nm DUV to 13.5nm EUV wavelengths since the imaging tool is a low-pass filter with EUV passing more spatial frequencies. Even the high frequency mask LER may impact the wafer image by lowering its image log-slope (ILS). Studying the magnitude and frequency content of mask LER is a first step to reducing the wafer LER. The next step is to determine which components of mask line roughness actually contribute to the wafer line roughness. Order is imposed on this study by fabricating programmed LER patterns on an EUV mask to introduce controlled variations in LER spatial frequency and magnitude. More specifically, line-width roughness (LWR), LER and power spectral density (PSD) are extracted from 64nm and 90nm (1X) pitch lines on a programmed LER EUV photomask. The same mask is then exposed on the ASML EUV Alpha Demo Tool (ADT) at best focus and dose. Three chemically amplified EUV photoresists are evaluated using the programmed LER photomask through PSD and LWR comparisons and the highest performance resist is used for a comprehensive LER transfer analysis. Wafer LWR is extracted from 64nm and 90nm pitch lines and correlated back to the base mask patterns revealing an empirical LWR transfer function (LTF). Finally, the study is extended to 45nm (1X) pitch lines by deploying a pupil filter on the ADT to explore the effect on LWR as the feature sizes shrink.

Citation Download Citation

Zhengqing John Qi, Emily Gallagher, Yoshiyuki Negishi, Gregory McIntyre, Amy Zweber, Tasuku Senna, Satoshi Akutagawa, and Toshio Konishi "Impact of EUV photomask line-edge roughness on wafer prints", Proc. SPIE 8522, Photomask Technology 2012, 85222H (8 November 2012); https://doi.org/10.1117/12.976855

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available