KEYWORDS: Image processing, Digital signal processing, Image segmentation, Control systems, Signal processing, Video, Process control, Video processing, Digital image processing, RGB color model
This paper describes the design and fabrication of a system for acquisition and image processing to control the removal of thorns nopal vegetable (Opuntia ficus indica) in an automated machine that uses pulses of a laser of Nd: YAG. The areolas, areas where thorns grow on the bark of the Nopal, are located applying segmentation algorithms to the images obtained by a CCD. Once the position of the areolas is known, coordinates are sent to a motors system that controls the laser to interact with all areolas and remove the thorns of the nopal. The electronic system comprises a video decoder, memory for image and software storage, and digital signal processor for system control. The firmware programmed tasks on acquisition, preprocessing, segmentation, recognition and interpretation of the areolas. This system achievement identifying areolas and generating table of coordinates of them, which will be send the motor galvo system that controls the laser for removal
This paper presents the development of an installation for proves for characterization by fluorescence of micrometer and nanometer particles supported on the trapping and manipulation by optical trapping technique (optical tweezers). The system features an laser operating at 480 nm, CCD camera for image acquisition, Thor Labs micrometric table X, Y, Z for the movement of the sample and the trap in the visual field. The design includes the use of intensity modulated optical trap, with the option of being used in pulsed, opening up possibilities for the use of resonant phenomena optomechanical type for particle capture.
An algorithm for the analysis of the double clad fiber design is presented. The algorithm developed in the MATLAB
computing language, is based on ray tracing method applied to three-dimensional graphics figures which are composed
of a set of plans. The algorithm can evaluate thousands of ray paths in sequence and its corresponding pump absorption
in each of the elements of the fiber according to the Lambert-Beer law. The beam path is evaluated in 3 dimensions
considering the losses by reflexion and refraction in the faces and within the fiber. Due to its flexibility, the algorithm
can be used to study the ray propagation in single mode or multimode fibers, bending effects in fibers, variable
geometries of the inner clad and the core, and could also be used to study tappers.
We report the fabrication of glass multilayer doped with semiconductor nanoparticles. The glass
matrix was fabricated by Plasma Enhanced Chemical Deposition (PECVD using tetramethoxysilane
(TMOS) as precursor. The RF power was supplied by a RF-150 TOKYO HI-Power operating at
13.56 MHz and coupled to the RF electrodes through a matching box. The nanoparticles were
grown by pulsed laser deposition (PLD) of a PbTe target using the second harmonic of a Q-Switched
Quantel Nd:YAG laser in high purity inert gas atmosphere.
The influence of gas and background pressure and in the nanoparticle size and size distribution is
studied. The morphological properties of the nanostructured material were studied by means of High
Resolution Transmission Electron Microscopy(HRTEM), grazing-incidence smallangleX-ray
scattering (GISAXS).
The potential of Nd:YAG pulsed laser to processing PVC sheets minimizing HCl gases emission is investigated. We
studied the gas emission when the PVC is cut by either CO2 or Nd:YAG pulsed laser by using FTIR Spectroscopy.
Optical microscopy of laser treated PVC samples was performed in order to demonstrate the carbonization. On the other
hand, LIBS spectroscopy for two different ranges of pulse duration was employed in order to investigate the plume
composition during the Nd:YAG pulsed laser ablation process. The experiments shows that Cl atoms are emitted during
the Nd:YAG pulsed laser ablation although the HCl gases are produced at low levels. In order to explain the sub-surface
irregularities detected for Nd:YAG laser irradiation, a one-dimensional model is developed to study the temperature
evolution inside the sample. We demonstrate that the ablation mechanisms prevail on thermally drive emission until 70
μm, afterwards the thermal expansion process is already observed.
An experimental measurement by using Laser Induced Breakdown Spectroscopy (LIBS) and Photoacoustic
Induced by Laser Ablation (PILA), in order to monitoring the microcraks formation inside the
glass induced by laser pulses is presented in this work. The laser was operated in both single pulse and
multi-pulse Q:Switched regime using a passive Cr:YAG crystal as switching element. The LIBS spectra
captured inside the glass avoid identifying the sample composition without influence of surrounding
atmosphere like occurs if the spectra are obtained on the surface. On the other hand, the PILA signal
permits to monitor the process and its dependence from the number and intensity of micro-pulses.
A method is proposed for the design of fundamental mode high power resonators, with joined stability zones. A
parameter is created which gives the minimum length a laser resonator should have while having at the same time the
broadest stabilities zones. For multimode and large mode volume resonators, a configuration is introduced for
maximizing the laser overall efficiency due to the compensation of the astigmatism induced by the flash lamp pumping
heating. The later configuration proposes a dual-active medium resonator, with 90 degree rotation around the optical axis
between the astigmatic thermal lenses of the mediums. The reliability of this configuration is corroborated
experimentally using a Nd:YAG dual-active medium resonator. It is found that in the pumping power range where the
astigmatism compensation is possible, the overall efficiency is constant, even when increasing the excitation power with
the consequent increase of the thermal lens dioptric power.
The use of the photoacoustic technique for real time monitoring of the efficiency and cleaning sites localization during the laser assisted removal of the spiky glochids from prickly pear fruit is proposed. Prickly pear areoles were irradiated with high energy microsecond Nd: YAG laser sequence of pulses up to the entirely removal of the glochids agglomerate. Strong selective absorption of the laser radiation leads to the formation of a high pressure plasma. The photoacoustic experiments were done in open air conditions using a standard electret transducer. Results obtained from photoacoustic signal analysis display high sensibility and signal to noise ratio for in situ monitoring of the process.
A qualitative analysis of laser breakdown experiment in prickle pear ablation is presented. The experiments were made using a pulse free-running Nd:YAG laser, and consist in irradiating both the areole and cortex zones. It was find out that the intensity of spectra captured from ablated glochids depends from number of pulses and the presence of water. The picks observed on the electronic noise can be associated with combustion products obtained during thermal laser interaction. It was demonstrated that LIBS technique can be used for on-line monitoring in laser de-thorning machine.
The development of laser skin perforator device for obtaining blood samples is presented. The use of photoelectric proximity photoelectric sensor permits to determine the focal point eliminating any contact and them avoiding the risk of contamination. Perforation of about 0.2 mm - 0.5 mm in diameter can be obtained in order to take the sample of blood. The method permits to make the blood analysis not only avoiding the contamination risk but also diminishing the pain sensation in comparison with metal lancet.
The cleaning of CuZn surfaces is carried out suing a portable Nd:YAG laser and also a 'fixed' CO2 laser. With both lasers the layer of dirtiness is efficiently eliminated. The cleaning process with Nd:YAG laser with nanosecond range pulse duration, cause periodic surface structure formation, as well as an increase of the surface hardness of about 20 percent, attributed to the 'shock hardening' effect. When the CO2 laser is used for cleaning, the melting of a thin surface layer is observed.
In the present work Bi thin films were obtained by Pulsed Laser Deposition, using Nd:YAG lasers. The films were characterized by optical microscopy. Raman spectroscopy and X-rays diffraction. It was accomplished the real time spectral emission characterization of the plasma generated during the laser evaporation process. Highly oriented thin films were obtained.
The research projects at the Laser Technology Laboratory of Havana University are devoted to Nd:YAG lasers development and to the implementation of new laser applications in different fields. Relative to the lasers research the objective is the development of compact, light and relative low-cost lasers. This development is based on a vertical integration strategy that establishes the own elements production as pumping cavities, multilayer mirrors and filters, power supplies control units and others. Several investigations are carried out using these lasers: thin film deposition of semiconductor, ferroelectric and magnetic materials by laser ablation, subsurface laser marking of transparent materials, pulse laser surface silicon texturing and laser cleaning of art works.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.