This paper presents a new approach for compensating resistance nonuniformity of uncooled microbolometers by
adjusting the bias currents of both detector and reference pixels. Contrary to conventional nonuniformity compensation
circuits, this approach eliminates the need for digital-to-analog converters (DACs), which usually occupy a large area,
dissipate high power, and require complicated external circuitry with high frequency data transfer to the microbolometer
chip. The proposed circuit uses a feedback structure that dynamically changes the bias currents of the reference and
detector pixels and does not need complicated external circuitry. A special feature of the circuit is that it provides
continuous compensation for the detector and reference resistances due to temperature changes over time. The circuit is
implemented in a 0.6μm 5V CMOS process and occupies an area of only 160μm × 630μm. Test results of the prototype
circuit show that the circuit reduces the offset current due to resistance nonuniformity about 2.35% of its
uncompensated value, i.e., an improvement of about 42.5 times is achieved, independent of the nonuniformity amount.
The circuit achieves this compensation in 12μsec. Considering its simplicity and low cost, this approach is suitable for
large array commercial infrared imaging systems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.