Sloan Digital Sky Survey fifth-generation (SDSS-V) Local Volume Mapper (LVM) is a wide-field IFU survey that uses an array of four 160 mm telescopes. It provides IFU spectra over the optical range with R ∼ 4,000 to reveal the inner components of galaxies and the evolution of the universe. Each telescope observes the science field or the calibration field independently, but all of them should be simultaneously synchronized with the science exposure. To minimize the moving parts, the LVM adopted the siderostat design with a field derotator. We designed the optimized control software for our LVM observation, lvmagp, which controls four focusers, three K-mirror derotators, one fiber selector, four mounts (siderostats), and seven guide cameras. It was built on its owen user interface and messaging protocol called actor and clu based on asynchronous programming. The lvmagp provides three key sequences: autofocus sequence, field acquisition sequence, and autoguide sequence. Also, we designed and fabricated the proto-model siderostat for the software test. The real sky test was made with proto-model siderostat, and the lvmagp showed arcsecond-level field acquisition and autoguide accuracy.
This paper presents an update on the construction, testing, and commissioning of the SDSS-V Local Volume Mapper (LVM) telescope system. LVM is one of three surveys that form the fifth generation of the Sloan Digital Sky Survey, and it will employ a coordinated network of four, 16-cm telescopes feeding three fiber spectrographs at the Las Campanas Observatory. The goal is to spectrally map approximately 2500 square degrees of the Galactic plane with 37” spatial resolution and R~4000 spectral resolution over the wavelength range 360-980 nm. LVM will also target the Magellanic Clouds and other Local Group galaxies. Each of the four LVM telescopes consists of a two-mirror siderostat in alt-alt configuration feeding an optical breadboard. This produces a fixed, stable focal plane for the fiber-based Integral Field Unit (IFU). One telescope hosts the science IFU, while two others observe adjacent fields to calibrate geocoronal emission. The fourth telescope makes rapid observations of bright stars to compensate telluric absorption. The entrance slits of the spectrographs intersperse the fibers from all three types of telescope, producing truly simultaneous science and calibration exposures. We summarize the final design of the telescope system and report on its construction, alignment and testing in the laboratory. We also describe our deployment plan for commissioning at LCO, anticipated for late 2022.
The Local Volume Mapper (LVM) project is one of three surveys that form the Sloan Digital Sky Survey V. It will map the interstellar gas emission in a large fraction of the southern sky using wide-field integral field spectroscopy. Four 16-cm telescopes in siderostat configuration feed the integral field units (IFUs). A reliable acquisition and guiding (A&G) strategy will help ensure that we meet our science goals. Each of the telescopes hosts commercial CMOS cameras used for A&G. In this work, we present our validation of the camera performance. Our tests show that the cameras have a readout noise of around 5.6 e- and a dark current of 21 e-/s, when operated at the ideal gain setting and at an ambient temperature of 20 °C. To ensure their performance at a high-altitude observing site, such as the Las Campanas Observatory, we studied the thermal behaviour of the cameras at different ambient pressures and with different passive cooling solutions. Using the measured properties, we calculated the brightness limit for guiding exposures. With a 5 s exposure time, we reach a depth of ∼16.5 Gaia gmag with a signal-to-noise ratio (SNR) < 5. Using Gaia Early Data Release 3, we verified that there are sufficient guide stars for each of the ∼25 000 survey pointings. For accurate acquisition, we also need to know the focal plane geometry. We present an approach that combines on-chip astrometry and using a point source microscope to measure the relative positions of the IFU lenslets and the individual CMOS pixels to around 2 µm accuracy.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.