Unspecified Madison Hedges Profile

Madison Hedges

Undergraduate Laboratory Assistant at Arizona State University

SPIE Involvement:

Author

Area of Expertise:

Microsoldering , SolidWorks , Amplifiers

Websites:

Personal Website

Publications (1)

Proceedings Article | 16 August 2024 Poster + Paper

A customizable, five-stage, intermediate frequency, low-noise amplifier and readout chain for the Astrophysics Stratospheric Telescope for High-spectral Resolution Observations at Submillimeter-wavelengths (ASTHROS)

Justin L. Mathewson, Ricardo Rodriguez, Eric Weeks, Paul Horton, Cody Roberson, Madison Hedges, Christian Thompson, Jonathan Kawamura, Jose Siles, Hamdi Mani, Philip Mauskopf, Chris Groppi

Proceedings Volume 13102, 1310226 (2024) https://doi.org/10.1117/12.3018025

KEYWORDS: Signal attenuation, Balloons, Telescopes, Design, Amplifiers, Microcontrollers, Astrophysics, Interference (communication)

Read Abstract +

Atmospheric interference, noise, and attenuation are a few limitations that arise when observing emissions of sub-millimeter wavelengths using ground-based telescopes. On-going research conducted on high-altitude balloons allow a new direction in observing these distributed emissions and eliminates all possible atmospheric interference. All sub-millimeter balloons and ground-based telescopes could benefit from a compact, re-configurable, high gain, programmable amplifier module to use in their receivers. We have designed, built, and tested an amplifier module for the Astrophysics Stratospheric Telescope for High Spectral Resolution Observations at Sub-millimeter wavelengths (ASTHROS), which is a high-altitude balloon mission that utilizes high-spectral resolution spectrometry to analyze stellar feedback by mapping ionized gas from the Milky Way galaxy and other neighboring galaxies. Using a five-stage Intermediate Frequency (IF) Low Noise Amplifier (LNA) added to a readout chain using commercial off-the-shelf components, the amplifier module yields 74 dB of gain up to 3.5 GHz with 31.75 dB of programmable attenuation with relatively linear gain flatness of ±1 dB, all while consuming 2.25 W per module (9 V at 250 mA).

While the amplification techniques and technology in this field are not new, achieving such high gain in systems usually require a significant amount of space to be allocated onboard. To alleviate this issue, this amplifier module has a unique form factor that combines the entire amplifier chain and bias system all in one module, saving space and weight on the system. The form factor design also allows the module to be stacked on top of one another to provide a higher range of gain in the system. Currently, the modules can be stacked up to eight times, and can be connected to allow for full control of the system with the use of a microcontroller. Sub-millimeter systems can have a set of 8 modules, all while saving space and reducing used weight.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years