With the development of augmented reality displays and integrated photonics devices, researchers are faced with the task of developing new methods for recording the waveguide holograms and creating the diffractive waveguides. Recording of such type diffraction elements is associated with increasing the complexity level since large convergence angles of the recording beams must be provided. The object wave must be inside the substrate during recording. A manuscript demonstrates a stable and simple method for multiplexed recording of the Bragg diffraction gratings for AR displays using phase masks. This recording technique is accompanied with no need in strong vibration isolation because of interferometric branches absence in the optical scheme. Presented research is distinguished by conical illumination of the phase mask with a single recording laser beam to manufacture the slant volume gratings for AR waveguide displays. An important result for the research is in experimental confirmation of the beneficial application of non-selective surface phase mask in comparison with volume selective one. Diffraction waveguides in this experiment made of photo-thermo-refractive (PTR) glass — unique material for integration of phase diffraction elements into waveguide platform. Creation of substrate-mode multiplexed Bragg gratings in planar waveguide made from PTR glass is the challenge of the research.
In interference linear optical displacement sensors, precise position information is provided by the pair of quadrature sine and cosine signals while measuring scales moves along each other. One of these scales is a transmission diffraction grating that combines beam splitter function with phase retardation element. Precalculated parameters of that gratings based not only on diffraction efficiency analysis but phase relations in orders as well, helps to stabilize quadrature signals in the displacement sensor. This paper set the optimization condition in terms of phase shifts of light in diffraction orders influencing phase imbalance. To simulate the conversions of optical radiation by diffraction gratings, a rigorous coupled waves analysis was used. The phase imbalance of the obtained quadrature signals is estimated depending on the uncertainties of influencing parameters.
The article describes the variants for using the relief phase diffraction gratings for a waveguide used as an optical input/output element for images in augmented reality systems. A characteristic feature of diffraction gratings with a surface relief, which, in this case, were recorded in the photoresist layer, is a relatively small relief depth (of the order of several tenths of a micrometer), while the diffraction efficiency of such gratings is quite high (up to 30%). The paper considers an implementation option for a waveguide with a common angular field of view close to 60°. The article presents the waveguide options used to output both monochrome images and display full-color images.
The paper considers optical linear encoder based on diffraction gratings. A method of quadrature signals phase shift stabilization based on the application of head grating with specific structure is proposed. The optical scheme of position encoder based on measuring head grating with specific structure is developed and described in this paper. Mathematical modeling of quadrature signals phase shift depending on grating parameters is carried out. Based on the simulation, we propose optimal parameters of head grating structure. Design process and results for head gratings are presented in the paper.
The article describes the features of the security elements used in color three-dimensional security holograms. Unlike classical security holograms - "rainbow" relief - phase holograms, color three-dimensional security holograms have spectral and angular selectivity. This feature allows them to create new security elements or use the properties of already known elements as a new. The article describes the schemes and devices for creating such security elements, as well as devices for their visualization and control. Examples of typical security elements used in color three-dimensional security holograms are presented. This work was supported by the Russian Science Foundation (Project No. 18-79-00304).
Optical position encoders working according to the interference method consists of a measurement scale and a measuring head moving along each other. The scale has a reflection diffraction grating on its surface and the measuring head has a transmission diffraction grating with same period inside. Laser light passing and diffracting through these two gratings creates an interference signal on an optical detector. Decoding of the interference signal phase allows to determinate current position. Known optical position encoders use complex optical schemes and some phase optical elements to form several quadrature signals with different phase for higher encoder accuracy. Previously we researched such kind of schemes [1, 2]. In this paper we propose to use a common optical scheme without phase elements but with a complex structured measuring head grating for this purpose to simplify an optical scheme and alignment requirements. The optical scheme of position encoder based on measuring head grating with specific structure is research and described in this paper.
A holographic wavefront sensor scheme using a phase-only spatial light modulator (SLM) with reduced cross-talk noise influence is proposed. A novel method for plane wave aberration measuring using a phase-only computer-generated hologram is devised. The proposed scheme and algorithm are validated with numerical simulations and experiments.
That paper focuses on diffraction gratings consisting some period failures provided by the errors of the electronbeam lithography method. Samples of lithographic phase gratings were tentatively analyzed to describe that technological errors. A small linear modulation of the period or a joint of a frame edges can cause not only diffraction efficiency losses but also functional breakdown. A simulation of the diffraction of a monochromatic wave at the described diffraction phase structures is carried out. Described diffraction gratings have interest in field of linear displacement encoders.
The article presents a two-stage scheme for obtaining volume color security holographic stereograms. These holograms are digital holograms. The H1 - hologram is recorded at the first stage. The final holographic stereogram is recorded at the second stage. The image of the H1-hologram is reconstructed in the plane of pupils of the observer's eyes, when 3-D images are reconstructed from holographic stereograms. The quality of the 3-D images reconstructed from hologram stereograms directly depends on the degree of blurring of the H1 image - the hologram. The article shows mathematical calculations describing the effects of the spectral and angular selectivities of a three-dimensional color security holographic stereogram on the process of reconstructing 3-D images (the degree of blurring of the H1 image-hologram). It is shown, that the quality of security elements, such as the "flip-flop effect", for this type of hologram, has a more pronounced effect in the vertical plane than in the horizontal plane. This is due to the large influence of the spectral and angular selectivities in the vertical plane, than in the horizontal one when reconstructing the images. Photos of images, reconstructed from a three-dimensional color security holographic stereogram, are also presented in the article. These photos confirm the correctness of the presented calculations.
Optical position encoders working according to the interference method consists of a measurement scale and a measuring head moving along each other. The scale has a reflection diffraction grating on its surface and the measuring head has a transmission diffraction grating with same period inside. Laser light passing and diffracting through these two gratings creates an interference signal on an optical detector. Decoding of the interference signal phase allows to determinate current position. Known optical position encoders use complex optical schemes and some phase optical elements to form several quadrature signals with different phase for higher encoder accuracy. Previously we researched such kind of schemes [1, 2]. In this paper we propose to use a common optical scheme without phase elements but with a complex structured measuring head grating for this purpose to simplify an optical scheme and alignment requirements. The optical scheme of position encoder based on measuring head grating with specific structure is research and described in this paper.
The article describes a new optical scheme of noncontact sensor for measuring linear displacement - linear encoder.
This sensor is an optical device in which the measurement of displacement is performed by analyzing the optical signal,
which pass through two diffraction gratings, one of which is moved relative to the other. The optical signal is obtained by
the diffraction of light in these diffraction gratings and subsequent interference of diffracted beams. Often this type of
sensors are multi-channel devices with symmetrically positioned of detectors. This scheme is proposed to use a multisection
phase mask that allows to make a small-sized sensor. Sections of this multi-section phase mask are the optical
windows and they made the final interference signals to be shifted relative to each other in phase. The number of sections
in the multi-section phase mask can be varied. Estimated sufficient number of sections is four or more.
Visual security elements used in color holographic stereograms - three-dimensional colored security holograms - and methods their production is describes in this article. These visual security elements include color micro text, color-hidden image, the horizontal and vertical flip - flop effects by change color and image. The article also presents variants of optical systems that allow record the visual security elements as part of the holographic stereograms. The methods for solving of the optical problems arising in the recording visual security elements are presented. Also noted perception features of visual security elements for verification of security holograms by using these elements. The work was partially funded under the Agreement with the RF Ministry of Education and Science № 14.577.21.0197, grant RFMEFI57715X0197.
Optical position encoder consists of movable coding grating and fixed analyzing grating. Light passing and diffracting through these two gratings creates interference signal on optical detector. Decoding of interference signal phase allows to determinate current position. Known optical position encoders use several accurate adjusted optical channels and detectors to gather several signals with different phase for higher encoder accuracy. We propose to use one optical channel with several-section analyzing diffraction grating for this purpose to simplify optical scheme and adjusting requirements. Optical scheme of position encoder based on four-section analyzing diffraction grating is developed and described in this paper.
The optical scheme of holographic printer for obtaining of holographic stereograms with an increasing field of view is proposed. Conventional holographic printers allow obtaining holographic stereograms with the field of view up to 90°. Proposed scheme allows increasing field of view up to 120°. The optical scheme is based on a diffuser and a diffraction optical element, the high-aperture diffractive lens. The experience of using the composite holographic lens and the amplitude diffractive lens based on a binary Fresnel zone plate as a high-aperture diffractive lens is described. Samples of high-aperture diffractive lens with f-number f/0.3 are obtained and investigated. Samples of holographic stereograms are obtained using samples of high-aperture diffractive lens.
The paper presents the practical results of recording holographic stereograms. Advantages and disadvantages of methods for producing holographic stereograms using diffusers with different indicatrices scattering of the radiation in the object branch and without the use of a diffuser are presented. A new security element - multi-color microtext, is presented. Shows how to use multi-color microtext as a hidden security element. The method of multi-color microtext visualization is shown. The work was partially funded under the Agreement with the RF Ministry of Education and Science no. 14.577.21.0197, grant RFMEFI57715X0197.
Method for the analysis of plasmonic gratings is developed. The mathematical research of the spectral-angular characteristics of plasmonic gratings is realized. The dependency of spectral-angular characteristics on geometric parameters of the plasmonic grating are disclosed. Samples of plasmonic gratings are obtained. The results of mathematical modeling and theoretical studies are confirmed by the experimental samples. Spectral-angular characteristics of the plasmonic gratings samples qualitatively repeat theoretically modeled characteristics.
The urgency of application of the optoelectronic analyzer for security holograms identification in real time for
paper documents and plastic cards is obvious. The spatial-frequency spectrum analyzing method for security hologram is
offered.
The essence of the method consists in reception of the security holograms (SH) microstructure spatialfrequency
spectrum (SFS), description SH SFS by means of integral, peak and combined parameters, and identification
analyzed SH by the correlation recognition method by comparison of analyzed SH SFS parameters with reference SH
SFS parameters. For this purpose it is enough to illuminate SH by laser or light-emitting diode (LED) radiation to
construct by Fourier lens SH SFS, to register it with matrix receiver of radiation, and to process a signal in the electronic
block.
The mathematical model of a spatial-frequency spectrum of the SH is constructed and investigated. We will
consider SH SFS in the limited sector of spatial frequencies. It is possible to describe SH SFS in terms of integral
parameters, peak parameters, and their combinations. A series of such parameters is offered. Several SH identification
algorithms is offered.
The optical scheme of optoelectronic spectrum analyzer for identification SH is offered and experimentally
investigated.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.