Paper
9 March 2013 Effects of actuation methods and temperature on adhesion force between polycrystalline silicon surfaces in MEMS
M. Shavezipur, C. Carraro, R. Maboudian
Author Affiliations +
Abstract
The adhesion force between polycrystalline silicon surfaces in MEMS structures is studied using three different test structures. Electrostatic and thermal actuations are used to bring the two surfaces into contact and mechanical force stored in the structures is used to separate them. In particular, the devices consist of (i) double-clamped beam that is actuated electrostatically and measured optically, (ii) suspended plate that is actuated electrostatically and measured capacitively, and (iii) thermally actuated and optically measured beams. The devices are fabricated using PolyMUMPs® process. The results show that the adhesion force in tested structures has little or no dependence on the apparent contact surface and is highly affected by the test environment and the actuation methods. The test results at high temperatures (100-130 °C) show that in absence of capillary and electrostatic forces, the adhesion force drastically decreases and mainly depends on the number of contacting asperities.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Shavezipur, C. Carraro, and R. Maboudian "Effects of actuation methods and temperature on adhesion force between polycrystalline silicon surfaces in MEMS", Proc. SPIE 8614, Reliability, Packaging, Testing, and Characterization of MOEMS/MEMS and Nanodevices XII, 861402 (9 March 2013); https://doi.org/10.1117/12.2008898
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microelectromechanical systems

Silicon

Capillaries

Electrodes

Finite element methods

Optical testing

Silica

Back to Top