Paper
9 September 2010 Global optimization with traveling aspherics: aspheric surface number as continuous variable
Author Affiliations +
Proceedings Volume 7652, International Optical Design Conference 2010; 76522P (2010) https://doi.org/10.1117/12.866826
Event: International Optical Design Conference 2010, 2010, Jackson Hole, WY, United States
Abstract
The aspherics is effective to reduce the number of lenses and to improve the performance of the optical system. The lens designer determines the surfaces to be aspheric and executes the optimization. But it is unknown a priori which surfaces should be aspheric. If the designer tries all the combination of the aspheric surface numbers, the number of the combination is very large. One method to solve this difficulty is to extend the aspheric surface number to a continuous variable and include it in the variables of the optimization. I would call it the traveling aspherics. The best surface number of the aspherics is determined through the optimization. The global optimization is necessary to get the best surface number of the aspherics. In section 1, the definition of the traveling aspherics is explained. In section 2, the design procedure with the traveling aspherics is explained. In section 3, the effect of the traveling aspherics is examined through a practical lens design problem. The method of the traveling aspherics can be applied to any complicated cases and requires no special experience of the lens design.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akira Yabe "Global optimization with traveling aspherics: aspheric surface number as continuous variable", Proc. SPIE 7652, International Optical Design Conference 2010, 76522P (9 September 2010); https://doi.org/10.1117/12.866826
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aspheric lenses

Chemical elements

Lens design

Modulation transfer functions

Optical spheres

Lenses

Current controlled current source

RELATED CONTENT

How to design and tolerance with GRADIUM glass
Proceedings of SPIE (September 21 1998)
Simple Method For Designing Lenses
Proceedings of SPIE (September 16 1980)
Wide Angle Lenses For Projection TV
Proceedings of SPIE (February 14 1986)
Design of a projection TV zoom lens with the grin...
Proceedings of SPIE (April 17 1998)
A novel optical design for car-camera lenses
Proceedings of SPIE (August 25 2010)

Back to Top