Paper
25 August 2010 A novel optical design for car-camera lenses
Author Affiliations +
Abstract
A novel car camera lenses have been designed. To reduce the cost, the system gives up the glued lenses. The whole optical system is made of six separated lenses and an IR-Cut Filter, among which there is two aspheric lenses and four spherical lenses. All lenses are made of glass. The resolutions of car camera system is three million pixels and the field angle is 150°.The Tangential MTF is 0.2 at spatial frequency of 300 cycles/mm when field angle is equal to 150°. The axis MTF is 0.7 at spatial frequency of 150 cycles/mm. The overall length of system is 18.23mm. The F-number is 2.8 and the effective focus length is 1.6mm. The new-designed car camera lenses can provide high-resolutions and very wide field angle. At the same time, the glass structure of lenses enjoys better thermal and mechanical stability than polymer lenses. The novel car-camera lenses will be then tested in the experiment.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongjian Zhu, Weiqing Pan, and Yufeng Fan "A novel optical design for car-camera lenses", Proc. SPIE 7787, Novel Optical Systems Design and Optimization XIII, 77870V (25 August 2010); https://doi.org/10.1117/12.860143
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lenses

Cameras

Aspheric lenses

Modulation transfer functions

Glasses

Lens design

Spatial frequencies

Back to Top