Paper
22 January 2010 High power photonic crystal distributed feedback quantum cascade lasers emitting at 4.5 μm
Burç Gökden, Steven B. Slivken, Manijeh Razeghi
Author Affiliations +
Abstract
Quantum cascade lasers possess very small linewidth enhancement factor, which makes them very prominent candidates for realization of high power, nearly diffraction limited and single mode photonic crystal distributed feedback broad area lasers in the mid-infrared frequencies. In this paper, we present room temperature operation of a two dimensional photonic crystal distributed feedback quantum cascade laser emitting at 4.5 μm. peak power up to ~0.9 W per facet is obtained from a 2 mm long laser with 100 μm cavity width at room temperature. The observed spectrum is single mode with a very narrow linewidth. Far-field profile has nearly diffraction limited single lobe with full width at half maximum of 3.5o normal to the facet. The mode selection and power output relationships are experimentally established with respect to different cavity lengths for photonic crystal distributed feedback quantum cascade lasers.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Burç Gökden, Steven B. Slivken, and Manijeh Razeghi "High power photonic crystal distributed feedback quantum cascade lasers emitting at 4.5 μm", Proc. SPIE 7608, Quantum Sensing and Nanophotonic Devices VII, 760806 (22 January 2010); https://doi.org/10.1117/12.855649
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum cascade lasers

Photonic crystals

Diffraction

Pulsed laser operation

High power lasers

FT-IR spectroscopy

Temperature metrology

Back to Top