Paper
26 March 2007 Thermal aberration control for low-k1 lithography
Yusaku Uehara, Tomoyuki Matsuyama, Toshiharu Nakashima, Yasuhiro Ohmura, Taro Ogata, Kosuke Suzuki, Noriaki Tokuda
Author Affiliations +
Abstract
For many years, we have used a lens aberration controller that works via positioning elements of the projection lens assembly. While this has worked well, its disadvantage is that controllable aberrations are only relatively low order components and not enough for the degree of compensation of thermal aberrations required by leading-edge lithography. We have developed two methods to overcome thermal aberrations specific to dipole illumination exposure. One scheme is process-dedicated aberration control by the conventional aberration controller. The other is aberration control system using infra-red irradiation. This system can compensate uniform astigmatism which is generated by asymmetric setting of illumination light sources, such as dipole illumination schemes. Theses two techniques allow us to increase productivity by reducing pattern imaging performance degradation due to thermal aberrations. These schemes are applicable not only to current systems but also to next generation very low k1 lithography systems with very high throughput.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yusaku Uehara, Tomoyuki Matsuyama, Toshiharu Nakashima, Yasuhiro Ohmura, Taro Ogata, Kosuke Suzuki, and Noriaki Tokuda "Thermal aberration control for low-k1 lithography", Proc. SPIE 6520, Optical Microlithography XX, 65202V (26 March 2007); https://doi.org/10.1117/12.711440
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Lithography

Lithographic illumination

Process control

Light sources

Optical lithography

Resolution enhancement technologies

RELATED CONTENT


Back to Top