Process window OPC verification: dry versus immersion lithography for the 65nm node

Amandine Borjon; Jerome Belledent; Yorick Trouiller; Kevin Lucas; Christophe Couderc; Frank Sundermann; Jean-Christophe Urbani; Yves Rody; Christian Gardin; Frank Foussadier; Patrick Schiavone

doi:10.1117/12.657056

21 March 2006 Process window OPC verification: dry versus immersion lithography for the 65nm node

Amandine Borjon, Jerome Belledent, Yorick Trouiller, Kevin Lucas, Christophe Couderc, Frank Sundermann, Jean-Christophe Urbani, Yves Rody, Christian Gardin, Frank Foussadier, Patrick Schiavone

Author Affiliations +

Proceedings Volume 6154, Optical Microlithography XIX; 61544D (2006) https://doi.org/10.1117/12.657056
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

Ensuring robust patterning after OPC is becoming more and more difficult due to the continuous reduction of layout dimensions and diminishing process windows associated with each successive lithographic generation. Lithographers must guarantee high imaging fidelity throughout the entire range of normal process variations. To verify the printability of a design across process window, compact optical models similar to those used for standard OPC are used. These models are calibrated from experimental data measured at the limits of the process window. They are then applied to the design to predict potential printing failures. This approach has been widely used for dry lithography. With the emergence of immersion lithography in production in the IC industry, the predictability of this approach has to be validated on this new lithographic process. In this paper, a comparison between the dry lithography process model and the immersion lithography process model is presented for the Poly layer at 65 nm node patterning. Examples of specific failure predictions obtained separately with the two processes are compared with experimental results. A comparison in terms of process performance will also be a part of this study.

Citation Download Citation

Amandine Borjon, Jerome Belledent, Yorick Trouiller, Kevin Lucas, Christophe Couderc, Frank Sundermann, Jean-Christophe Urbani, Yves Rody, Christian Gardin, Frank Foussadier, and Patrick Schiavone "Process window OPC verification: dry versus immersion lithography for the 65nm node", Proc. SPIE 6154, Optical Microlithography XIX, 61544D (21 March 2006); https://doi.org/10.1117/12.657056

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available