EUVL mask manufacturing: technologies and results

Florian Letzkus; Joerg Butschke; Mathias Irmscher; Holger Sailer; Uwe Dersch; Christian Holfeld

doi:10.1117/12.628957

7 November 2005 EUVL mask manufacturing: technologies and results

Florian Letzkus, Joerg Butschke, Mathias Irmscher, Holger Sailer, Uwe Dersch, Christian Holfeld

Proceedings Volume 5992, 25th Annual BACUS Symposium on Photomask Technology; 59922A (2005) https://doi.org/10.1117/12.628957
Event: SPIE Photomask Technology, 2005, Monterey, California, United States

Abstract

Extreme Ultraviolet Lithography (EUVL) is the favourite next generation lithography candidate for IC device manufacturing with feature sizes beyond 32nm. Different stacks and manufacturing concepts have been published for the fabrication of the reflective EUVL masks. Patterning processes for two different absorber-buffer combinations on top of the reflective multi layer mirror have been developed. A TaN/SiO₂ absorber-buffer stack was provided by supplier A and TaBN/Cr by supplier B. In addition both absorbers were covered by an anti reflective coating (ARC) layer. An e-beam patterned 300nm thick film of Fuji FEP171 was used as resist mask. We optimized the etching processes for maximum selectivities between absorber, buffer and capping layers on the one hand and rectangular profiles and low etch bias on the other hand. While both TaN based absorbers have been dry etched in an UNAXIS mask etcher III, wet and dry etch steps have been evaluated for the two different buffer layers. The minimum feature size of lines and holes in our test designs was 100nm. After freezing the processes a proximity correction was determined considering both, the influence of electron scattering due to e-beam exposure and the influence of the patterning steps. Due to the correction an outstanding linearity and iso/dense bias on different test designs was achieved. Various masks for printing experiments at the small-field Micro Exposure Tool (MET) in Berkeley and the fabrication of the ASML α-tool setup mask within the European MEDEA⁺ EXTUMASK project were done using the developed processes. Finally, we will compare and discuss the results of the two stack approaches.

Citation Download Citation

Florian Letzkus, Joerg Butschke, Mathias Irmscher, Holger Sailer, Uwe Dersch, and Christian Holfeld "EUVL mask manufacturing: technologies and results", Proc. SPIE 5992, 25th Annual BACUS Symposium on Photomask Technology, 59922A (7 November 2005); https://doi.org/10.1117/12.628957

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available