Paper
27 August 1999 Gate dielectric monitoring using noncontact electrical characterization
Jerzy Ruzyllo, P. Roman, D. O. Lee, M. Brubaker, Emil Kamieniecki
Author Affiliations +
Abstract
Reduction of gate oxide thicknesses to the tunnelable range as well as the anticipated introduction of alternative gate dielectric materials create new challenges regarding monitoring of gate insulation processes. In this paper methodologies applied in gate oxide characterization are considered and advantages of non-contact methods are emphasized. More specifically, the Surface Charge Profiling (SCP) method, which is particularly well suited for this application is discussed. This method allows measurement of the charge density without any bias on the oxide, and hence, without any current flow across the oxide. Therefore, measurements of surface/oxide charge density as well surface recombination lifetime can be carried on oxides in which charge measurement using other methods would be prevented due to significant current. This capability of the SCP method is demonstrated using experimental results.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jerzy Ruzyllo, P. Roman, D. O. Lee, M. Brubaker, and Emil Kamieniecki "Gate dielectric monitoring using noncontact electrical characterization", Proc. SPIE 3884, In-Line Methods and Monitors for Process and Yield Improvement, (27 August 1999); https://doi.org/10.1117/12.361335
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Silicon

Semiconducting wafers

Dielectrics

Molybdenum

Interfaces

Profiling

Back to Top