Paper
15 April 1997 Micromachined probes for high-frequency scanning force microscopy and scanning thermal microscopy
Michael Stopka, Stefan Muenster, T. Leinhos, Christopher Mihalcea, Wenzel Scholz, A. Leyk, W. Mertin, Egbert Oesterschulze
Author Affiliations +
Abstract
The spatial and time resolved characterization of electronic devices by scanning probe microscopy demands the fabrication of proximal probes with well defined properties. To fulfill these requirements micromachining is the most appropriate technique, as it allows probe fabrication in a batch process with highest reproducibility. In this paper we describe the development of electrical and thermal near-field probes which can be employed for high frequency scanning force microscopy (HFSFM) and scanning thermal microscopy (SThM) respectively. Both probes have been completely fabricated in a micromachining batch process based on an almost identical technological design. For electrical imaging by HFSFM a coplanar wave guide probe was developed. The probes wave guide properties have been characterized by network analysis. A novel thermal probe consisting of a Schottky diode at the tip of a silicon cantilever was developed for SThM. Preliminary results on electrical and thermal characterization will be presented.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Stopka, Stefan Muenster, T. Leinhos, Christopher Mihalcea, Wenzel Scholz, A. Leyk, W. Mertin, and Egbert Oesterschulze "Micromachined probes for high-frequency scanning force microscopy and scanning thermal microscopy", Proc. SPIE 3009, Micromachining and Imaging, (15 April 1997); https://doi.org/10.1117/12.271217
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Waveguides

Diodes

Atomic force microscopy

Oxides

Semiconducting wafers

Microscopy

Back to Top