Paper
27 May 1996 Optical system for high-throughput EUV lithography
Souichi Katagiri, Masaaki Ito, Hiromasa Yamanashi, Eiichi Seya, Tsuneo Terasawa
Author Affiliations +
Abstract
The designed optical system, which included an illumination optics and an imaging optics, consists of only one grazing-incidence mirror and a two-aspheric-mirror optics with a synchrotron radiation (SR) as a light-source. The illumination optics provides uniform illumination and high-collection efficiency of radiation from the SR. Since there are only four bounces in this system, including the reflective-mask bounce, this optical system has higher throughput. A throughput of 20-30 wafers/hour is predicted with the designed optics. A one- quarter-size prototype of the designed imaging optics was constructed with the numerical aperture of 0.1 and the magnification of 1/5. The efficiency of 60 percent (obtaining dose per estimated one) was obtained with AZ-PN 100 resist in the experiment. A minimum pattern of 0.12-micrometers lines and spaces was printed on a 0.15-micrometers -thick layer of AZ-PN 100 resist.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Souichi Katagiri, Masaaki Ito, Hiromasa Yamanashi, Eiichi Seya, and Tsuneo Terasawa "Optical system for high-throughput EUV lithography", Proc. SPIE 2723, Electron-Beam, X-Ray, EUV, and Ion-Beam Submicrometer Lithographies for Manufacturing VI, (27 May 1996); https://doi.org/10.1117/12.240487
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Photomasks

Wafer-level optics

Optical design

Semiconducting wafers

Reflectivity

Polishing

RELATED CONTENT

Overview of extreme ultraviolet lithography
Proceedings of SPIE (December 07 1994)
Development of an experimental EUVL system
Proceedings of SPIE (November 28 2007)
Design of imaging system for EUVL
Proceedings of SPIE (November 01 1997)

Back to Top