Paper
18 December 2019 Effect of scanning speed on microstructure and properties of 30Cr3Ni2 alloy steel prepared by direct laser deposition
Xueting Chen, Suiyuan Chen, Yining Zhu, Tong Cui, Jing Liang, Changsheng Liu, Mei Wang
Author Affiliations +
Proceedings Volume 11333, AOPC 2019: Advanced Laser Materials and Laser Technology; 113331F (2019) https://doi.org/10.1117/12.2548056
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
The 30Cr3Ni2 alloy steel samples were prepared by direct laser deposition (DLD) technology with different scanning speeds. The microstructure and mechanical properties of the samples were studied by metallographic microscope, scanning electron microscopy, energy dispersive spectroscopy, microhardness tester and electronic universal material tester. The results show that when the laser power was 2500W and the scanning speed was 10mm/s, the fabricated sample mainly consisted of granular bainite(GB) with (Fe,Cr)7C3 carbide. The average hardness value was 341HV, the tensile strength was 875Mpa, the yield strength was 867Mpa, and the elongation was 3.9%. This study provides the basis for the further development of alloy steel produced by DLD.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xueting Chen, Suiyuan Chen, Yining Zhu, Tong Cui, Jing Liang, Changsheng Liu, and Mei Wang "Effect of scanning speed on microstructure and properties of 30Cr3Ni2 alloy steel prepared by direct laser deposition", Proc. SPIE 11333, AOPC 2019: Advanced Laser Materials and Laser Technology, 113331F (18 December 2019); https://doi.org/10.1117/12.2548056
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser applications

Particles

Scanning electron microscopy

Iron

Laser processing

Chromium

Manganese

RELATED CONTENT

Metal reduction at bulk chemical filtration
Proceedings of SPIE (March 27 2017)
Obtaining of micro powder coatings from Fe Ni and Fe...
Proceedings of SPIE (December 11 2019)
Impurities in solar-grade silicon
Proceedings of SPIE (January 09 2008)
Research on properties of tailor-welded blanks for automobiles
Proceedings of SPIE (September 12 2002)

Back to Top