Aiming at the characteristics of the honeycomb structure with periodic distribution in the optical platform and the problem of low efficiency caused by the complex geometric features, the equivalent modeling method for the optical platform from inhomogeneous micro structure to homogeneous solid entity is established by homogenization method. In order to cope with the deficiency of the equivalent method in the analysis of the local details, a two-scale analysis method based on equivalent model and reduction model is proposed. The results from the application to the examples of the static and dynamic analysis show that the error is less than 7%, and the bi-directional analysis of the optical platform between macro scale and micro scale is achieved.
Vibration is an important factor that could affect the performance of airbone optical system, the damping device based on the wire-rope vibration isolators was designed in this paper, in which the optical system mounted on the helicopter was taken as an example. The transmissibility of the damping device was about 40% which obtained by finite element method, the transmissibility of the damping device was about 36% which obtained by vibration platform test, the result obtained by finite element method was proved by vibration platform test. The vibration of the optical system could been reduced significantly as a result of the device with good damping effect, thereby the stability of the optical system could be enhanced.
The quality of clamping device for PPMgLN crystal has a vital influence on the optical property of solid-state laser. It has highly requirements of work stability and environmental adaptation ability, especially the thermal adaptation under high temperature differences. To achieve thermal adaptation, structural stiffness will be unavoidably weakened. How to keep both enough stiffness and thermal adaptation as far as possible is the key design point and also difficult point. In this paper, a kind of flexible thermal release unit which can work permanent under 130±10°C is studied. Thermal compensation principle and flexible thermal release theory are applied. Analysis results indicate that this device can effectively decreased the thermal stress of the crystal from 85MPa to 0.66MPa. The results of the vibration resistance test on the optical axis direction of the crystal indicate that the device can provide at least 5.62N to resistant 57.2g impact vibration and 18.5g impact vibration in the side direction, well satisfied the requirements of ability to resistant 6g impact vibration.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.