When a plastic substrate is under a highlight, the reflected light on the substrate always dazzles the observer. To prevent
the effect, anti-reflected (AR) coating is applied. However AR-coating is difficult to be designed with wide wavelength
range. In this research, the discontinuous metallic films were fabricated on the plastic substrates to reduce the reflection
of the plastic substrates with wide wavelength range. To reduce more reflectance, the discontinuous metallic film can
also be applied as the mask of selective ion etching to achieve rough surface. The results show the average reflectance of
the AR-coating on the plastic substrates has been decreased 5%. The average transmittance has been increased 3%.
A novel technique was proposed to fabricate a three-dimensional photonic crystal by self-assembling microspheres and the autocloning technology. The autocloning thin-film layers were superimposed on the prepared two-dimensional structural substrates using self-assembled microspheres. The thin-film process allows the three-dimensional periodic structure to be easily modified in the thickness dimension to structure as needed. We analyzed the etching effect using the unified process model according to the surface movement and surface velocity of the film to achieve the surface profile of the SiO2 adjusting layer. Finally, 17 layers of Ta2O5/SiO2 multilayers were stacked on the SiO2 adjusting layer successfully.
A novel design of photonic-crystal polarization filter was demonstrated with dual-band and wide working wavelength
range. The structure of the filter is a 2-dimensional wavy structure of multilayer thin films consisted with a number of
alternate high and low refractive indices transparent dielectric layers deposited sequentially on a periodic structured
substrate. The fabrication of the photonic-crystal polarization filter is based on an autocloning method which integrated
the techniques of lithography and thin film deposition. Different from the traditional polarizing beam splitters, the
photonic-crystal polarization filter is a flat type of polarizer with normal incident angle. The transmission and
reflectance spectra were analyzed using finite-difference time-domain method (FDTD). From the analysis result, we
found the photonic bandgap was happened at transverse electric (TE) mode and the passband at transverse magnetic (TM) mode. So, the photonic crystal polarization filter can separate TE mode and TM mode effectively as the field is incident normally. We design the working wavelength range of the photonic-crystal polarization filter at both visible and near infrared regions, and have wide polarization separated band at normal incident. Finally, the bandwidth is about 100 nm in visible region and 300 nm at near infrared region. The extension ratio is about 20 both in visible region and near infrared region.
The triangle shape of two dimensional photonic crystals were fabricated based on autocloning technique, and preserved
the periodic surface corrugation after the deposition of multilayer stacks using an E-beam gun evaporation with ion-assisted
deposition (IAD). Drude model has been applied to analyze the effective refractive indices of the structural
single-layer and multilayer autocloning films with triangle shape in the visible range which divided into several periodic
parts. The advantage of using the model of effective refractive index is the optical properties of structural multilayer
films can be analyzed easily. The effective refractive indices have been calculated based on this model, and simulated
the reflectance and transmittance of the different incident angles. The influences of the structure period on the
reflectance and transmittance were also analyzed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.