Prof. Ryszard Piramidowicz Profile

Prof. Ryszard Piramidowicz

Professor

SPIE Involvement:

Author

Publications (38)

Proceedings Article | 19 June 2024 Presentation

Presentation

MIRPIC: photonic integrated circuits for mid-IR spectral range

Ryszard Piramidowicz, Stanislaw Stopinski, Krzysztof Anders, Anna Jusza, Marcin Lelit, Andrzej Polatynski, Piotr Wiśniewski, Mateusz Slowikowski, Marcin Juchniewicz, Jaroslaw Jurenczyk, Marek Liebert, Kamil Pierscinski, Dorota Pierscinska

Proceedings Volume PC13012, (2024) https://doi.org/10.1117/12.3022512

KEYWORDS: Photonic integrated circuits, Mid infrared, Internet of things, Integrated photonics, Environmental monitoring, Data communications, Telecommunications, Silicon, Quantum cascade lasers, Printed circuit board testing

Read Abstract +

Proceedings Article | 30 May 2022 Presentation

Presentation

Development of ASPICs for applications in sensing systems

Stanislaw Stopinski, Anna Jusza, Krzysztof Anders, Slawomir Szostak, Andrzej Kazmierczak, Mateusz Slowikowski, Ryszard Piramidowicz

Proceedings Volume PC12139, PC1213906 (2022) https://doi.org/10.1117/12.2624529

KEYWORDS: Sensing systems, Gyroscopes, Signal detection, Light sources, Integrated optics, Fiber optics, Fiber Bragg gratings, Sensors, Photonic integrated circuits, Waveguides

Read Abstract +

Recent advances in integration technologies enable constructing novel, highly complex and miniaturized photonic systems for a large variety of applications. A constantly increasing interest can be observed in implementing application specific photonic integrated circuits (ASPICs) in a new generation of optical sensing systems. The InP platform allows to realize complete interrogators of sensing systems, comprising the light sources and photodetectors. An InP PIC can also be used as a sensing element itself. In this work we discuss the sensing systems addressing two different application fields, which can benefit from the recent developments of InP platforms - optical gyroscopes and interrogators of fiber Bragg gratings. The principle of work of optical gyroscope is based on the Sagnac effect. Two typical configurations can be identified – interferometric fiber-optic gyroscope (IFOG) and ring laser gyroscope (RLG). An integrated interrogator unit of an IFOG system presented here was realized using a DBR laser, passive couplers and PIN photodiodes. Characterization results have proven the possibility of detection of the Sagnac signal for the length of the fiber loop of 1 km. We also discuss monolithic single-frequency lasers, which were realized in the framework of the development of an integrated optical gyro. Also, the integrated interrogators of fiber Bragg gratings are presented and discussed. The investigated solutions are based on the interrogation scheme in which a broadband signal is coupled to a network of FBGs, and the reflected signals are analyzed using a spectrometer based on an arrayed waveguide grating. Several realized circuits are discussed with respect to their design, characterization results and potential for application in sensing systems. Studies were funded by FOTECH-1 project granted by Warsaw University of Technology under the program Excellence Initiative: Research University (ID-UB). This work was partially supported by National Centre for Research and Development (PBS3/B9/41/2015).

Proceedings Article | 30 May 2022 Poster

Poster

Integrated photonic transmitter for mode division multiplexing system

Aleksandra Pasnikowska, Stanislaw Stopinski, Paweł Bortnowski, Krzysztof Anders, Ryszard Piramidowicz

Proceedings Volume PC12141, PC121410T (2022) https://doi.org/10.1117/12.2624528

KEYWORDS: Transmitters, Multiplexing, Integrated photonics, Wavelength division multiplexing, Receivers, Photonic integrated circuits, Multiplexers, Demultiplexers, Data transmission, Single mode fibers

Read Abstract +

Proceedings Article | 30 May 2022 Presentation

Presentation

Progress in developing optically active fibers in Poland

Pawel Bortnowski, Anna Jusza, Krzysztof Anders, Paweł Mergo, Ryszard Piramidowicz

Proceedings Volume PC12142, PC121420W (2022) https://doi.org/10.1117/12.2624514

KEYWORDS: Optical fibers, Fiber lasers, Laser applications, Active optics, Laser development, Manufacturing, Laser systems engineering, Laser cutting, Ytterbium, Thulium

Read Abstract +

The first ruby laser, developed by Theodore Maiman in 1960 initiated the era of laser technology, characterized by rapid progress in all fields benefiting from unique features of coherent radiation sources. Among various types of lasers developed so far, fiber lasers plays continuously increasing role in those areas where high output powers and high efficiency combined with single mode operation and excellent heat dissipation are of concern. In the recent years, fiber laser-based systems dominated the market of material processing (cutting, welding, hardening, etc.) and military systems, while rare-earth doped fiber amplifiers became a key element of modern telecommunication systems. It should be noted, however, that despite a large number of fiber lasers manufacturers around the world, there are only a few companies with technological skills enabling manufacturing the active fibers of sufficient quality. In this work we would like to show the progress of Polish research teams in this field. The R&D works, conducted for the last few years in cooperation with Laboratory of Fiber Optic Technology at the Faculty of Chemistry of Maria Curie-Skłodowska University, Lublin, Poland, enabled mastering the technology of manufacturing the first active optical fibers applicable to laser systems. In this work the overview of the technology will be presented together with the results of characterization of ytterbium, erbium, thulium and dysprosium doped optical fibers, dedicated to laser applications. The absorption/emission spectra and luminescence kinetics profiles of active preforms and optical fibers will be discussed and compared to the results obtained for commercially available samples. Also the results of amplification and laser experiments will be presented and perspectives of the active fiber technology in Poland will be discussed. This work has received partial support from the National Centre for Research and Development through project NMKM+ (TECHMATSTRATEG1/348438/16/NCBR/2018).

Proceedings Article | 25 May 2022 Presentation

Presentation

Few-mode optical fibers for application in future telecommunication networks

Krzysztof Anders, Pawel Bortnowski, Pawel Komorowski, Anna Jusza, Pawel Mazurek, Jaroslaw Turkiewicz, Pawel Mergo, Krzysztof Markiewicz, Tomasz Nasilowski, Ryszard Piramidowicz

Proceedings Volume PC12140, PC1214009 (2022) https://doi.org/10.1117/12.2624520

KEYWORDS: Optical fibers, Networks, Data transmission, Multiplexing, Wavelength division multiplexing, Single mode fibers, Video, Telecommunications, Optics manufacturing, Clouds

Read Abstract +

Increasing demand for high data transmission rates and bandwidth availability driven by the rapid development of the broadband services becomes challenging in the context of constraints imposed by nowadays exploited telecommunication optical fibers. Based on single-mode fibers and multiplexing in the wavelength domain (wavelength division multiplexing, WDM), the current technology seems to have reached its fundamental limits. At present, two promising technologies are a subject of intensive research. One of them is the increase of the data transmission through multiplying the number of fiber cores, thus implementing the concept of Multi-Core Fibers (MCF), where each core is used as a separate data transmission channel. The second widely investigated technique is based on the idea of mode division multiplexing (MDM), where different transverse modes of a Few-Mode Fiber (FMF) can be used as different carriers for data channels. In this work, we demonstrate the results of R&D works and the comprehensive tests of the few-mode fibers developed within the project NMKM+. Developed few-mode fibers (both passive and active) and their commercially available counterparts have been tested with respect of transmission parameters and applicability to the real telecom systems. In particular, guided mode profiles, numerical apertures, OTDR, and dispersion characteristics for the passive fibers have been recorded and compared. Also, methods of selective excitation and detection of singular modes have been discussed and partially verified. The results of data transmission experiments have been performed and discussed with respect to the quality of transmitted signals. These have been complemented by the amplification experiments with the use of erbium-doped few-mode fibers in “classical” and microstructural geometry. The results were studied and analyzed, showing the potential for future optimization. Acknowledgement: This work has received support from the National Centre for Research and Development through project NMKM+ (TECHMATSTRATEG1/348438/16/NCBR/2018).

Proceedings Article | 17 May 2022 Presentation + Paper

Presentation + Paper

Towards the most convenient configuration of integrated photonic sensor for implementation in SiO2:TiO2 sol-gel derived waveguide film technology

Andrzej Kazmierczak, Muhammad Ali Butt, Magdalena Zięba, Cuma Tyszkiewicz, Paweł Karasiński, Ryszard Piramidowicz

Proceedings Volume 12139, 1213908 (2022) https://doi.org/10.1117/12.2622209

KEYWORDS: Waveguides, Sensors, Refractive index, Integrated optics, Resonators, Integrated photonics, Photonic integrated circuits, Cladding, Sol-gels, Light wave propagation

Read Abstract +

Proceedings Article | 2 April 2020 Presentation + Paper

Presentation + Paper

Development of integrated photonics based on SiO2:TiO2 sol-gel derived waveguide layers: state of the art, perspectives, prospective applications

Paweł Karasiński, Cuma Tyszkiewicz, Ryszard Piramidowicz, Andrzej Kaźmierczak

Proceedings Volume 11364, 1136414 (2020) https://doi.org/10.1117/12.2559059

KEYWORDS: Waveguides, Refractive index, Integrated photonics, Sol-gels, Directional couplers, Sensors, Integrated optics, Glasses, Signal attenuation

Read Abstract +

Proceedings Article | 24 May 2018 Presentation

Presentation

Remote monitoring vital signs using active 3D imaging (Conference Presentation)

Piotr Garbat, Agata Olszewska, Karolina Waledzik, Ryszard Piramidowicz

Proceedings Volume 10685, 106852D (2018) https://doi.org/10.1117/12.2307417

KEYWORDS: Vital signs, Stereoscopy, Heart, Imaging systems, Signal detection, Signal analyzers, Principal component analysis, Image quality, Motion estimation, Structured light

Read Abstract +

Video-based heart rate estimation based on the PPG technique is a remote optical technique allowing to determine the heart rate and breath rate through the intensity or motion variations. This paper proposes a new monitoring method for simultaneous estimation of heart and breathing rates using an active 3D system with structured light. Active 3D imaging systems capture information about 3D object shapes using artificial illumination. An active 3D imaging system can be realized using different techniques: time-of-flight, triangulation, motion flow, interferometry. In this work, we investigate triangulation-based systems. Heart and respiration rates are signals analyzed in proposed systems as crucial vital signs from a medical point of view. Furthermore, the type of respiration is also analyzed with separation between abdominal and torso type. The quality of breathing signals received from various optical systems is also compared. This system is based on different approaches to 3D imaging and includes random light pattern, fridge light pattern and active stereo methods. In the light pattern systems, the movements of the chest and abdominal are associated with breathing and are observed by the video camera as the light pattern deformation. The system based on active stereo method provides the depth map by which the breath signal is extracted. Further analysis of received signals is based on Principal Component Analysis (PCA). The proposed remote optical technique extracts the blood pulse from an image captured by a vision system. Patient’s face is detected with use of dedicated convolutional neural network for robust face alignment. Based on found features points, a few regions of interest are selected, and then their results are compared. Mean pixel values for three color channels (red, green, blue) are calculated. Active 3D imaging technique enables stabilization and quality improvement of the captured image. Not correlated groups of pixels are eliminated. Then cluster analysis is used on the grounds of multi-features. Measurement data are detrended by empirical mode decomposition EEMD. Subsequently, ICA was applied to recover source signals from the observations. Maximum frequency pick in the FFT spectrum determines HR. The performance of the proposed system was tested through a series of experiments. Vital signs of 10 persons with reference signals have been detected. Both, breath and heart rates estimates were found to be accurate. The proposed system can be used as a component of more complex medical systems where information about the condition of the examined patient is crucial or important.

Proceedings Article | 23 May 2018 Presentation

Presentation

Noninvasive optoelectronic system for monitoring of the heart and respiratory rate of the patient exposed to MRI scanning (Conference Presentation)

Stanisław Stopiński, Anna Jusza, Krzysztof Anders, Andrzej Kaźmierczak, Konrad Markowski, Tomasz Osuch, Mariusz Krej, Lukasz Dziuda, Paweł Szczepański, Ryszard Piramidowicz

Proceedings Volume 10680, 106800T (2018) https://doi.org/10.1117/12.2307594

KEYWORDS: Magnetic resonance imaging, Optoelectronics, Heart, Fiber Bragg gratings, Magnetism, Sensors, Photonic integrated circuits, Diagnostics, Medicine, Optical sensing

Read Abstract +

The magnetic resonance imaging (MRI) technique is a powerful diagnostic tool which is nowadays commonly used in many fields of medicine. In some cases, especially of the patients of intensive care units, it is highly recommended or even necessary to provide continuous monitoring of basic physiologic parameters, mainly the heart rate and the respiratory rate, during the MRI scan procedure. The presence of a strong magnetic field within the MRI chamber requires application of non-standard devices and solutions. The monitoring system needs to be immune to the strong magnetic field and simultaneously cannot negatively influence on the results of the scan. Therefore, application of optical sensing technologies could be potentially advantageous to fulfil these requirements. In this work we propose a novel optoelectronic measurement system, dedicated to monitoring of the patient during an MRI scan, immune to strong magnetic field and compatible with the MRI apparatus. Fiber Bragg gratings (FBGs) are used as the sensing elements – the strain induced by the patient’s respiration and cardiac activity cause a change of the Bragg wavelength. These changes can be accurately measured and monitored in the time domain. The respiratory and heart rate can be extracted by further processing of the measured signal by dedicated software. The gratings are organized in a network to maximize the effective sensing area. Each of the FBGs has a different Bragg wavelength so that they can be connected in series. The information from the sensors is read out using an interrogator based on an application specific photonic integrated circuit (ASPIC), designed and fabricated in an InP-based generic integration technology. The interrogator comprises a 36-channel arrayed waveguide grating wavelength demultiplexer, which outputs are connected to PIN photodiodes. Such a photonic circuit acts as a spectrometer and allows to reconstruct the reflection spectrum of many gratings simultaneously. An external superluminescent LED is used as the light source, however in the target configuration the source could be monolithically integrated with the interrogator. The Bragg gratings, the interrogator and the SLED are connected with each other using an optical circulator. Initial tests of the monitoring system have been performed using a single fiber Bragg grating as the strain sensor and a commercially available optoelectronic interrogator. The fiber with an inscribed FBG was mounted using an epoxy glue on a PMMA board and deployed under the patient. Two signals can be distinguished out of the measured waves. The first one, with strong and slowly-varying peaks, reflects the respiration of the patient. The second signal, characterized by low-intensity and fast-varying peaks is a result of the cardiac activity. No influence of the magnetic field of the MRI instrument on the sensing system has been observed. The first results have confirmed both the correctness of the approach and the applicability of the system to monitoring the patient’s physical condition during MRI diagnosis. This work was supported by the National Centre for Research and Development, project OPTO-SPARE, grant agreement PBS3/B9/41/2015.

Proceedings Article | 23 May 2018 Presentation

Presentation

UV-VIS upconversion emission properties of Tm3++Yb3+:ZBLAN glasses (Conference Presentation)

Anna Jusza, Michal Poplawski, Krzysztof Anders, Ryszard Piramidowicz

Proceedings Volume 10683, 106831K (2018) https://doi.org/10.1117/12.2307582

KEYWORDS: ZBLAN, Glasses, Fiber lasers, Absorption, Radiation effects, Upconversion, Diode pumped solid state lasers, Semiconductor lasers, Solid state lasers, Photons

Read Abstract +

Continuous demand for compact and efficient laser sources, specifically those operating in short-wavelength spectral range, have resulted in dynamic development of both semiconductor and diode pumped solid state lasers. Undoubtedly, semiconductor lasers are presently the most intensively investigated field of active materials and a number of impressive results has been achieved, including violet GaN laser diodes. Nevertheless, solid state lasers are constantly considered as irreplaceable in all applications requiring excellent optical parameters of the beam together with high power levels. The short-wavelength emission and lasing in solid state lasers is typically obtained via harmonic generation or up-conversion phenomena. The latter method, involving either stepwise absorption of photons or energy transfer processes, is specifically applicable to fiber geometry, where high intensity of radiation and waveguiding effect guarantee high up-conversion efficiency. Trivalent thulium is the activator ion, which energy structure in certain conditions specifically favours a multi-photon or multi-ion pumping mechanisms resulting in emission within the UV-VIS part of spectrum. In low phonon glasses and fibers, luminescence from 1G4 (480 nm), 1D2 (455 nm), as well as 1I6 (287 nm) has been reported, typically involving ESA-type consecutive absorptions of 650 nm photons (3H6→3F2+3F3, 3F4→1G4, 3H4→1D2, 1G4→3PJ) [1]. UV-VIS emission has been also observed under multi-wavelength pumping at 1112 nm, 1116 nm and 1127 nm [2]. Several years ago laser action at 287 nm in Tm3+:ZBLAN fiber was obtained under consecutive ESA of 1064 nm delivered by an Nd3+:YAG laser [3] – which is to date the shortest wavelength of stimulated emission generated in an optical fiber. Laser experiments with thulium-activated fluoride fibers, however very promising, were all severely hindered by photodarkening effects accompanying excitation of UV-violet radiation in the fibers. In this work we present our latest results on UV emission properties of bulk ZBLAN glasses doped with thulium and co-doped with ytterbium ions in different concentrations. In particular, we carefully examined the absorption characteristics, as well as concentration-dependant spectra of UV emission from the 1I6 and 1D2 levels obtained under direct and up-conversion excitation. The fluorescence dynamics profiles, recorded for all concentrations, together with excitation spectra enabled discussion of mechanisms responsible for upper levels populating. Moreover, the multi-ion processes resulting in non-radiative depopulation of excited states have been carefully examined and appropriate cross-relaxation rates have been determined, giving further impact to better understanding of the short wavelength optical properties of the investigated system. This work has been supported by the National Science Centre, Poland, grant number 2011/03/B/ST7/01917. [1] J. Y. Allain, M. Monerie, H. Poignant. Blue upconversion fluorozirconate fibre laser, Electronics Letters 26 (1990), 166–168. [2] S. G. Grubb, K. W. Bennett, R. S. Cannon, W. F. Humer, CW room-temperature blue upconversion fibre laser, Electronics Letters 28 (1992), 1243–1244 [3] R. M. El-Agmy, Upconversion CW Laser at 284 nm in a Nd:YAG-Pumped Double-Cladding Thulium-Doped ZBLAN Fiber Laser, Laser Physics 18 (2008) 1-4.

Proceedings Article | 9 May 2018 Paper

Paper

Development of InP-based multichannel transmitters for application in WDM access systems

Aleksandra Paśnikowska, Stanisław Stopiński, Krzysztof Anders, Andrzej Kaźmierczak, Marcin Tomkiewicz, Ryszard Piramidowicz

Proceedings Volume 10682, 1068228 (2018) https://doi.org/10.1117/12.2307641

KEYWORDS: Transmitters, Modulators, Photonic integrated circuits, Wavelength division multiplexing, WDM-PON, Bragg gratings, Transceivers, Waveguides, Packaging, Laser applications

Read Abstract +

Proceedings Article | 9 May 2018 Paper

Paper

Integrated interrogator circuits for fiber optic sensor network in generic InP photonic integrated circuit technology

Andrzej Kaźmierczak, Anna Jusza, Mateusz Słowikowski, Stanisław Stopiński, Ryszard Piramidowicz

Proceedings Volume 10680, 106800M (2018) https://doi.org/10.1117/12.2306701

KEYWORDS: Polarization, Photonic integrated circuits, Fiber Bragg gratings, Photodiodes, Waveguides, Spectroscopy, Tunable lasers, Sensor networks, Sensors, Integrated circuit design

Read Abstract +

Proceedings Article | 1 September 2017 Paper

Paper

A study of MIR photoluminescence from Pr3+ doped chalcogenide fibers pumped at near-infrared wavelengths

S. Sujecki, L. Sojka, E. Beres-Pawlik, R. Piramidowicz, H. Sakr, Z. Tang, E. Barney, D. Furniss, T. Benson, A. Seddon

Proceedings Volume 10455, 1045504 (2017) https://doi.org/10.1117/12.2280098

KEYWORDS: Luminescence, Chalcogenides, Mid-IR, Light sources, Chalcogenide glass

Read Abstract +

Proceedings Article | 10 February 2017 Paper

Paper

Sensing applications of photonic integrated circuits: ultra-compact optical transducers and interrogators

Andrzej Kaźmierczak, Stanisław Stopiński, Anna Jusza, Krzysztof Anders, Ryszard Piramidowicz

Proceedings Volume 10325, 103250A (2017) https://doi.org/10.1117/12.2271041

Read Abstract +

Proceedings Article | 10 February 2017 Paper

Paper

Monolithically integrated multichannel transmitters for application in WDM-PON systems

Aleksandra Golba, Stanisław Stopiński, Anna Jusza, Krzysztof Anders, Andrzej Kaźmierczak, Marcin Tomkiewicz, Luc Augustin, Ryszard Piramidowicz

Proceedings Volume 10325, 103250Y (2017) https://doi.org/10.1117/12.2271090

Read Abstract +

Proceedings Article | 17 December 2015 Paper

Paper

Seven-core active fibre for application in telecommunication satellites

Marta Filipowicz, Marek Napierała, Michał Murawski, Łukasz Ostrowski, Łukasz Szostkiewicz, Michał Szymański, Tadeusz Tenderenda, Krzysztof Anders, Ryszard Piramidowicz, Grzegorz Wójcik, Mariusz Makara, Krzysztof Poturaj, Paweł Mergo, Tomasz Nasiłowski

Proceedings Volume 9816, 981613 (2015) https://doi.org/10.1117/12.2228835

KEYWORDS: Fiber amplifiers, Satellites, Optical fibers, Optical amplifiers, Erbium, Cladding, Photonics, Signal attenuation, Semiconductor lasers

Read Abstract +

Proceedings Article | 25 July 2013 Paper

Paper

Synthesis and characterization of polymer composite base on RE3+:Al2O3 nanopowders doped by rare earth metals for application in optoelectronics

P. Polis, A. Jastrzębska, J. Jureczko, A. Jusza, R. Piramidowicz, K. Anders, A. Olszyna, A. Kunicki, W. Fabianowski

Proceedings Volume 8902, 89022T (2013) https://doi.org/10.1117/12.2031360

KEYWORDS: Polymethylmethacrylate, Composites, Polymers, Manufacturing, Particles, Nanocomposites, Metals, Ytterbium, Optoelectronics, Crystals

Read Abstract +

Proceedings Article | 4 May 2012 Paper

Paper

Luminescent properties of polymer nanocomposites activated with praseodymium-doped nanocrystals

A. Jusza, L. Lipinska, M. Baran, P. Mergo, A. Millan, F. Dieleman, R. Piramidowicz

Proceedings Volume 8435, 84351T (2012) https://doi.org/10.1117/12.922143

KEYWORDS: Luminescence, Polymers, Nanocomposites, Ions, Composites, Polymethylmethacrylate, Praseodymium, Nanocrystals, Manufacturing, Visible radiation

Read Abstract +

Proceedings Article | 4 May 2012 Paper

Paper

Synthesis and characterization of RE3+:Al2O3 nanopowders for application in the polymer-based composite light sources

P. Polis, A. Jusza, K. Anders, A. Jastrzebska, A. Olszyna, J. Jureczko, W. Fabianowski, A. Kunicki, R. Piramidowicz

Proceedings Volume 8435, 84352A (2012) https://doi.org/10.1117/12.922751

KEYWORDS: Composites, Polymers, Ions, Erbium, Optics manufacturing, Ytterbium, Luminescence, Aluminum, Scanning electron microscopy, Titanium dioxide

Read Abstract +

Proceedings Article | 26 April 2012 Paper

Paper

Erbium doped low phonon glasses for application in up-conversion fiber lasers

K. Anders, P. Florczyk, R. Stepien, D. Pysz, R. Piramidowicz

Proceedings Volume 8426, 84260L (2012) https://doi.org/10.1117/12.922809

KEYWORDS: Glasses, Erbium, Luminescence, Semiconductor lasers, Phonons, Ions, Absorption, Fiber lasers, ZBLAN, Laser spectroscopy

Read Abstract +

Proceedings Article | 26 April 2012 Paper

Paper

Development of large core microstructured polymer optical fiber

Adam Filipkowski, Dariusz Pysz, Pawel Gdula, Katrin Welikow, Krzysztof Harasny, Andrew Waddie, Krzysztof Borzycki, Arno Kraft, Ryszard Piramidowicz, Ryszard Stepien, Mohammad Taghizadeh, Ryszard Buczynski

Proceedings Volume 8426, 842616 (2012) https://doi.org/10.1117/12.922845

KEYWORDS: Polymethylmethacrylate, Polymers, Polymer optical fibers, Polymerization, Cladding, Structured optical fibers, Glasses, Signal attenuation, Optical fibers, Optical properties

Read Abstract +

Proceedings Article | 26 April 2012 Paper

Paper

Microstructured plastic optical fibers for applications in FTTH systems

K. Welikow, P. Gdula, P. Szczepański, R. Buczyński, R. Piramidowicz

Proceedings Volume 8426, 84261A (2012) https://doi.org/10.1117/12.922371

KEYWORDS: Optical fibers, Phase only filters, Fiber to the x, Stars, Polymer optical fibers, Networks, Resistance, Signal attenuation, Cladding, Telecommunications

Read Abstract +

Proceedings Article | 7 October 2011 Paper

Paper

Modeling transmission parameters of polymer microstructured fibers for applications in FTTH networks

P. Gdula, K. Welikow, P. Szczepański, R. Buczyński, R. Piramidowicz

Proceedings Volume 8008, 800816 (2011) https://doi.org/10.1117/12.905673

KEYWORDS: Optical fibers, Polymer optical fibers, Polymers, Fiber to the x, Signal attenuation, Networks, Refractive index, Silica, Polymethylmethacrylate, Single mode fibers

Read Abstract +

Proceedings Article | 10 June 2011 Paper

Paper

Modeling of chromatic dispersion of microstructured fibers with effective index method

K. Welikow, P. Gdula, R. Piramidowicz

Proceedings Volume 8010, 80100J (2011) https://doi.org/10.1117/12.896231

KEYWORDS: Dispersion, Optical fibers, Data modeling, Cladding, Micro optical fluidics, Radio propagation, MATLAB, Dielectrics, Optical properties, Wave propagation

Read Abstract +

Proceedings Article | 15 September 2010 Paper

Paper

Fiber laser with loop reflector

P. Florczyk, K. Anders, P. Gdula, A. Jusza, R. Piramidowicz

Proceedings Volume 7745, 77450H (2010) https://doi.org/10.1117/12.873199

KEYWORDS: Fiber lasers, Erbium, Resonators, Glasses, Reflectors, Laser development, Absorption, Mirrors, Silica, Luminescence

Read Abstract +

Proceedings Article | 15 September 2010 Paper

Paper

Design of integrated photonic transmitter for application in fiber-to-the-home systems

Katarzyna Ławniczuk, Ryszard Piramidowicz, Paweł Szczepański, Meint Smit, Xaveer J. Leijtens

Proceedings Volume 7745, 77450P (2010) https://doi.org/10.1117/12.873088

KEYWORDS: Modulators, Transmitters, Waveguides, Fiber to the x, Michelson interferometers, Modulation, Photonic integrated circuits, Continuous wave operation, Reflectivity

Read Abstract +

Proceedings Article | 13 June 2008 Paper

Paper

Remote measurements system for applications in photonic materials characterization

P. Lesiak, S. Ertman, D. Budaszewski, A. Domański, T. Woliński, I. Burska, M. Klimczak, R. Piramidowicz, P. Warda, W. Kamiński, R. Sitnik, M. Kujawińska

Proceedings Volume 7120, 71200S (2008) https://doi.org/10.1117/12.804533

KEYWORDS: Luminescence, Data communications, Polarization, Databases, Human-machine interfaces, Internet, Data acquisition, Material characterization, Spectroscopy, Poincaré sphere

Read Abstract +

Proceedings Article | 28 December 2007 Paper

Paper

UV-violet optical transitions and excitation schemes in Ho3+:ZBLAN fibers

Mariusz Klimczak, Marek Cieślik, Marcin Kaczkan, Piotr Witoński, Ryszard Piramidowicz

Proceedings Volume 6937, 693718 (2007) https://doi.org/10.1117/12.784675

KEYWORDS: UV optics, Photons, Absorption, Optical fibers, Ions, ZBLAN, Spectroscopy, Fiber lasers, Single photon, Pulsed laser operation

Read Abstract +

Proceedings Article | 1 February 2007 Paper

Paper

Operating schemes for Pr3+ and Pr3++Yb3+ activated fluorozirconate fiber lasers in the visible

M. Klimczak, P. Witoński, M. Malinowski, R. Piramidowicz

Proceedings Volume 6599, 65990J (2007) https://doi.org/10.1117/12.726657

KEYWORDS: Praseodymium, Ytterbium, Fiber lasers, Absorption, Ions, Chromium, Systems modeling, Semiconductor lasers, Energy transfer, Luminescence

Read Abstract +

Proceedings Article | 12 October 2006 Paper

Paper

Prototyping of virtual photonic laboratory

K. Zieliński, M. Klimczak, M. Kaczkan, P. Witoński, R. Piramidowicz

Proceedings Volume 6347, 63472S (2006) https://doi.org/10.1117/12.714772

KEYWORDS: Internet, Human-machine interfaces, Control systems, Optoelectronics, Prototyping, Telecommunications, Data communications, Cameras, Micro optics, Semiconductor lasers

Read Abstract +

Proceedings Article | 12 October 2006 Paper

Paper

Operating conditions of dysprosium activated fluorozirconate fiber laser in the visible

M. Klimczak, P. Witoński, W. Żurawski, R. Piramidowicz

Proceedings Volume 6347, 634718 (2006) https://doi.org/10.1117/12.714640

KEYWORDS: Fiber lasers, Dysprosium, Absorption, Data modeling, Numerical analysis, Spectroscopy, Luminescence, Ions, Resonators, Visible radiation

Read Abstract +

Proceedings Article | 28 April 2006 Paper

Paper

Benchmarking instrumentation tools for the characterization of micro-optics within the EC Network of Excellence on Micro-Optics (NEMO)

H. Ottevaere, N. Destouches, C. Gorecki, T. Kossek, S. Pelli, R. Piramidowicz, P. Szcepanski, M. Kujawinska

Proceedings Volume 6188, 618819 (2006) https://doi.org/10.1117/12.663888

KEYWORDS: Micro optics, Birefringence, Absorption, Microlens, Fiber Bragg gratings, Interferometers, Diffraction gratings, Photonics, Luminescence, Applied physics

Read Abstract +

Proceedings Article | 26 April 2006 Paper

Paper

Modelling of short-wavelength operation of Nd³⁺doped fluorozirconate glass fiber laser

M. Klimczak, P. Witonski, A. Ryter, R. Piramidowicz

Proceedings Volume 6159, 615928 (2006) https://doi.org/10.1117/12.674820

KEYWORDS: Fiber lasers, Absorption, Laser damage threshold, Ions, Luminescence, Mirrors, Reflectivity, Ultraviolet radiation, Neodymium, Modeling

Read Abstract +

Proceedings Article | 12 October 2005 Paper

Paper

Modelling and optimization of Pr+Yb doped ZBLAN up-conversion fiber laser

R. Piramidowicz, P. Folaron, P. Witonski, M. Klimczak, M. Malinowski

Proceedings Volume 5958, 59582V (2005) https://doi.org/10.1117/12.622962

KEYWORDS: Praseodymium, Fiber lasers, Ytterbium, Ions, Absorption, Optimization (mathematics), ZBLAN, Mirrors, Modeling, Energy transfer

Read Abstract +

Proceedings Article | 12 October 2005 Paper

Paper

Analysis of multi-photon pumping schemes for Nd:ZBLAN fiber laser operating in the UV and violet

R. Piramidowicz, M. Klimczak, M. Malinowski

Proceedings Volume 5958, 59582T (2005) https://doi.org/10.1117/12.622899

KEYWORDS: Absorption, Fiber lasers, Neodymium, Ultraviolet radiation, Ions, Energy transfer, Single photon, ZBLAN, Luminescence, Spectroscopy

Read Abstract +

Proceedings Article | 6 October 2003 Paper

Paper

Solid state laser materials for ultraviolet wavelengths

Michal Malinowski, Ryszard Piramidowicz, Wieslaw Wolinski

Proceedings Volume 5230, (2003) https://doi.org/10.1117/12.531753

KEYWORDS: Ultraviolet radiation, Crystals, Ions, Upconversion, Solid state lasers, Nonlinear crystals, Laser crystals, Praseodymium, ZBLAN, Glasses

Read Abstract +

Proceedings Article | 1 November 1997 Paper

Paper

Absorption and emission properties of Pr3+ activated Be2La2O5 crystal

R. Piramidowicz, Michal Malinowski, Wieslaw Wolinski

Proceedings Volume 3176, (1997) https://doi.org/10.1117/12.293426

Read Abstract +

Proceedings Article | 14 August 1997 Paper

Paper

Influence of gamma radiation on active materials

Slawomir Kaczmarek, Krzysztof Kopczynski, Tadeusz Lukasiewicz, Zygmunt Frukacz, R. Piramidowicz, Andrej Matkovskii, Dmitry Sugak, A. Durygin

Proceedings Volume 3186, (1997) https://doi.org/10.1117/12.280516

KEYWORDS: Gamma radiation, Er:YAG lasers, Crystals, Laser crystals, Color centers, Absorption

Read Abstract +

Showing 5 of 38 publications

Conference Committee Involvement (2)

Laser Technology 2012: Applications of Lasers

24 September 2012 | Szczecin, Poland

Laser Technology 2012: Progress in Lasers

24 September 2012 | Szczecin, Poland

SIGN IN TO:

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Advertisement

Advertisement