Prof. Milutin Stanacevic Profile

Prof. Milutin Stanacevic

Associate Professor at Stony Brook Univ

SPIE Involvement:

Author

Publications (3)

Proceedings Article | 22 April 2020 Presentation + Paper

System prototype for a triboelectric harvester in a smart knee implant (SPIE Best Student Paper Finalist)

Manav Jain, Nabid A. Hossain, Shahrzad Towfighian, Milutin Stanaćević, Emre Salman

Proceedings Volume 11376, 113761F (2020) https://doi.org/10.1117/12.2558241

KEYWORDS: Electronic circuits, Signal processing, Prototyping, Attenuators, Diodes, Surgery, Data communications, Sensors, Electronic filtering

Read Abstract +

Total knee replacement (TKR) surgeries have been increasing tremendously in the past few years particularly among active young people and elderly people suffering from knee pain. Hence, continuous monitoring of the load on the knee after the knee surgery is highly desirable for designing an efficient and more functional smart knee implant. In this paper, we demonstrate a smart knee implant system which consists of a triboelectric harvester and a front-end electronic system which continuously monitors the load on the knee by relying only on the power harvested by the triboelectric harvester. The TKR system consists of the femoral, tibial tray, and the ultra high mechanical polyethylene (UHMWPE) bearing parts. The designed triboelectric harvesters are placed between the tibial tray and the UHMWPE bearing for perfect load monitoring. The frontend electronic system is placed on the tibial tray to be powered by the harvester. The triboelectric harvester produces an AC signal which is processed using our proposed frontend electronic system to monitor the load on the knee. For instance, at a knee cyclic load of around 230 N, the harvester produces 6.5 μW power and 18 V RMS signal at a frequency of 1 Hz. The frontend electronic system consists of a LC filter to process the high voltages from the harvester, a rectifier to convert the AC signal into a DC signal, a regulator to convert this DC signal into a stabilized and ripple free DC signal to provide biasing to the final stage, Delta-Sigma ADC, which finally converts the analog signal into digital bits. The power consumption of the proposed design is approximately 5 uW. According to the proposed design, monitoring the load several times a day is feasible by relying only on the harvested power. The prototype of the proposed system has been fabricated on a printed circuit board (PCB) and tested with the designed harvester. The test results demonstrate that triboelectric energy harvesting is a promising technique for self-monitoring the load inside knee implants. Through this research, the knee implants could be improved and failures can be detected at an early stage.

Proceedings Article | 27 May 2005 Paper

A miniature low-power intelligent sensor node for persistent acoustic surveillance

Gert Cauwenberghs, Andreas Andreou, Jim West, Milutin Stanacevic, Abdullah Celik, Pedro Julian, Thiago Teixeira, Chris Diehl, Laurence Riddle

Proceedings Volume 5796, (2005) https://doi.org/10.1117/12.606859

KEYWORDS: Acoustics, Sensors, Independent component analysis, Surveillance, Very large scale integration, Target detection, Intelligent sensors, Photomicroscopy, Signal to noise ratio, Telecommunications

Read Abstract +

Proceedings Article | 18 April 2003 Paper

VLSI multichannel track-and-hold potentiostat

Roman Genov, Milutin Stanacevic, Mihir Naware, Gert Cauwenberghs, Nitish Thakor

Proceedings Volume 5119, (2003) https://doi.org/10.1117/12.499482

KEYWORDS: Neurotransmitters, Electrodes, Sensors, Neurons, Very large scale integration, Carbon, Amplifiers, Transistors, Brain, Analog electronics

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years