Dynamic optical coherence elastography (OCE) is expected as new diagnostic technology of near tissue surface. However, few studies about shear wave propagation in inhomogeneous medium have been reported although human tissue is inhomogeneous medium. In this report, estimation of shear wave speeds and strain images of inhomogeneous medium were studied using swept-source optical coherence tomography (SS-OCT) system. Firstly, the shear wave speeds of four-layered chicken sample were measured. Secondly, OCT images of tissue mimicking phantoms, which included thread and aluminum wire were measured and strain distributions were calculated by PIV. Reflection and artifact of strain images were discussed.
It has been reported that temperature sensors based on modal interference in perfluorinated graded-index (GI) plastic optical fibers (POFs) show the world’s highest temperature sensitivity of +49.8 nm/°C/m at 1300 nm at room temperature, which is over 1800 times the value in silica multimode fibers (MMFs). In this work, we newly find that the temperature sensitivity (absolute value) is significantly enhanced with increasing temperature toward ~70°C, which is close to the glass-transition temperature of the core polymer. When the core diameter is 62.5 μm, the sensitivity at 72 °C at 1300 nm is +202 nm/°C/m, which is approximately 26 times the value obtained at room temperature and even over 7000 times the highest value previously reported using a silica MMF. As the glass-transition temperature of polymers can be generally set to an arbitrary value, this characteristic could be used to develop POF-based temperature sensors with ultra-high sensitivity not only at ~70°C but at arbitrary temperature in future.
We developed strain and temperature sensors based on multimode interference in perfluorinated graded-index (GI) plastic optical fibers, and investigate their sensing performance at 1300 nm. At room temperature, we achieve ultra-high sensitivities of strain and temperature of –112 pm/με and +49.8 nm/°C/m, the absolute value of which are approximately 7.2 and over 1800 times as large as those in silica GI multimode fibers, respectively. We also find that the temperature sensitivity is drastically enhanced with increasing temperature toward ~80 °C, where phase transition of core polymer partially occurs.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.