This work reports comparative results of mode analysis, performed for earlier on designed silica microstructured optical fiber with ideal equiangular spiral six-ray geometry (ESSR-MOF) and for its real fabricated sample, differing from the model by weak asymmetry and deformed air holes. We discuss issues of input data preparation to specify analyzed complicated non-ideal fiber optic structure for computation by using rigorous finite-element method. Some results of the comparison between mode field patterns as well as guided mode effective refractive index spectral characteristics are represented. It is demonstrated, that potential deviations from the desired MOF geometry, occurring due to features of silica MOF fabrication technological process, should be taken into account during the design to predict real values of mode parameters for manufactured MOF.
This work presents results of test series, performed for earlier on designed and successfully fabricated silica few-mode microstructured optical fibers (MOF) with six GeO2-doped cores, induced twisting 100 revolutions per meter, typical “telecommunication” outer diameter 125 μm, core diameter 8.7 μm, air hole diameter 4.6 μm, pitch 7.2 μm, and core quasi-step / graded refractive index profiles with height 0.0360/0.0275, respectively. Part I introduces attempts for splicing of typical telecommunication optical fibers and fabricated samples of MOFs by commercially available field arc fusion splicer kits and results of differential mode delay map measurements, performed for laser excited large core (multimode) optical fibers with core diameters 50 and 100 μm, jointed via free space to described above 2 m long pilot samples of 6-GeO2-core MOFs at both receiving and transmitting ends under laser-excited gaussian optical pulse launching with precision offset conditions, while Part II is concerned with researches of spectral responses, measured for fiber Bragg gratings, recorded in these MOFs.
This work presents results of test series, performed for earlier on designed and successfully fabricated twisted silica fewmode microstructured optical fibers (MOF) with six GeO2-doped cores. While Part I introduces results of differential mode delay map measurements, Part II is focused on researches of spectral responses, measured for fiber Bragg gratings, recorded in these multi-core MOFs with core graded refractive index profiles and induced twisting 100 revolutions per meter. Specially setup for spectral response measurement for described complicated fiber optic element was developed, that provides selected alignment of matching singlemode optical fiber with particular single core of MOF via free space and reducing of reflection by precision 8 angle cleaving. Comparing analysis of measured spectral responses confirmed written FBGs in 2 of 6 cores, and demonstrated potentiality of fabricated complicated structure, containing multi-core MOF with FBG, for applications in multichannel fiber optic sensors with spatial division multiplexing technique.
This work reports the results of bandwidth measurements and tests, performed for earlier on designed and fabricated pilot lengths of new silica laser-optimized graded-index multimode fibers (LOMFs) with extremely enlarged core diameter up to 100 μm and "typical" "telecommunication" cladding diameter 125 μm. Presented optical fibers are targeted for harsh environment short-range multi-Gigabit onboard cable systems and industrial networks. Proposed LOMF 100/125 differs by specially optimized graded refractive index profile, that provides low differential mode delay (DMD) for selected guided modes. We present some results of tests, performed for fabricated pilot 520 m length of described LOMF 100/125, focused on researches of bandwidth features. They contain DMD map and transfer function measurement as well as 10GBase-LX/SX channels eye-diagram and bit-error-ratio reports with following direct detection of the maximal acceptable optical fiber length for guaranteed 10Gbps channel supporting.
This work presents some results of pulse and spectral responses, performed for laser-excited pilot sample of earlier on designed and fabricated chiral silica few-mode optical fiber (FMF) with induced twisting 66 revolutions per meter (rpm), typical (for telecommunication optical fibers) cladding diameter 125 μm, weakly increased core diameter up to 11 μm and numerical aperture NA=0.22, corresponding to improved height of quasi-step refractive index profile. Described FMF 11/125 provides propagation of 4 and 6 guided modes over “C” and “O”-bands, respectively. We present results of tests, focused on researches of few-mode effects, occurring under laser-excited optical signal propagation over pilot sample optical fiber, and their influence on pulse and spectral responses, including some measurements, performed for fiber Bragg grating, recorded in tested FMF 11/125.
The testing ground based on the different technologies of optical cable installation is described in paper. The testing ground consist from communication lines based on microduct system and using direct underground installation. The comparison of different methods for cable trace location was performed. The experimental approbation of electromagnetic induction method, ground penetrating radar method and acoustic method was carried out on the testing ground.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.