15 November 2016 Absolute test for cylindrical surfaces using the conjugate differential method
Author Affiliations +
Abstract
An absolute testing method for cylindrical surfaces is presented in a null test setup with a computer-generated hologram. The absolute test exploits the symmetry of cylinders, which allows us to introduce a certain shift of the test surface both parallel to and rotated about the centerline while the null test condition is still maintained. With two shifts of the cylindrical surface, four measurements belonging to two groups in conjugate positions can be accomplished to obtain the absolute differential map with the interferometer and null optics errors removed. The absolute surface can be obtained by wavefront reconstruction from local differential data. A simulation of the method is presented to estimate the error propagation. Experimental absolute test results of a concave cylindrical surface with 100-mm radius are given. The measured profiles are compared with those obtained from a commercial profiler, showing a difference of less than 15 nm (root-mean-square).
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Ya Huang, Jun Ma, Caojin Yuan, Christof Pruss, Weiyuan Sun, Mincai Liu, Rihong Zhu, Zhishan Gao, and Wolfgang Osten "Absolute test for cylindrical surfaces using the conjugate differential method," Optical Engineering 55(11), 114104 (15 November 2016). https://doi.org/10.1117/1.OE.55.11.114104
Published: 15 November 2016
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Wavefronts

Computer generated holography

Photovoltaics

Error analysis

Optical engineering

Wavefront reconstruction

RELATED CONTENT


Back to Top