1 June 1984 Model-Based Restoration Procedure For Small, Low Resolution Optical Images
John A. Saghri, Andrew G. Tescher
Author Affiliations +
Abstract
A deterministic model-based restoration procedure is presented. The algorithm is effective for the restoration of coarsely sampled images degraded by diffraction and noise. The a priori information, an assumed parametric object model, is used to arrive at the solution. The object model is convolved with the optical system and sensing mechanism degradations and then matched against the limited number of available samples. The unknown parameters are then estimated using a numerical least mean square error optimization procedure. The method has been tested with a double delta function model via digital simulations. A zero-mean, additive, white Gaussian background noise process was assumed. The technique requires a high signal-to-noise ratio (SNR) to resolve the doublet with a separation distance smaller than the detector width. With increasing separation, good restoration can be achieved at low SNR. The procedure is applicable to restore generalized objects.
John A. Saghri and Andrew G. Tescher "Model-Based Restoration Procedure For Small, Low Resolution Optical Images," Optical Engineering 23(3), (1 June 1984). https://doi.org/10.1117/12.7973282
Published: 1 June 1984
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Model-based design

Signal to noise ratio

Image resolution

Optical resolution

Diffraction

Error analysis

Optical sensing

RELATED CONTENT

Sensor information capacity and spectral sensitivities
Proceedings of SPIE (January 19 2009)
High-frequency/low-frequency synthetic aperture sonar
Proceedings of SPIE (July 22 1997)
Subpixel resolution for target tracking
Proceedings of SPIE (January 12 1993)
Optimization of a coherent soft x ray beamline for coherent...
Proceedings of SPIE (September 23 2011)

Back to Top