Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

Sujan K. Sarkar; Sayantan Das; Victor M. Blanco Carballo; Philippe Leray; Sandip Halder

doi:10.1117/1.JMM.21.4.044901

28 October 2022 Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

Sujan K. Sarkar, Sayantan Das, Victor M. Blanco Carballo, Philippe Leray, Sandip Halder

Author Affiliations +

Journal of Micro/Nanopatterning, Materials, and Metrology, Vol. 21, Issue 4, 044901 (October 2022). https://doi.org/10.1117/1.JMM.21.4.044901

Abstract

Background

To keep up with the logic area scaling, back-end-of-line (BEOL) structures are reduced to smaller pitches, requiring faster and reliable metrology and defect detection solution.

Aim

Metrology and detailed defect inspection at the early phases of process optimization.

Approach

Single exposure (SE) 0.33NA extreme ultraviolet (EUV) lithography was used along with a bright field mask for patterning in a metal damascene process flow of BEOL structures. We also used a dual damascene process flow for voltage contrast (VC) metrology study.

Results

Scatterometry technique, together with machine learning (ML), allowed us to have fast and accurate measurements of line-space (LS) and tip-to-tip (T2T) critical dimension (CD), and prediction of electrical performance. We demonstrated characterization results of stochastic defects across various test structures of 28-nm pitch devices. We used a large-area electron beam (e-beam) tool for high-speed large-area inspection which provided us with the quick feedback on defect signatures and scope for further root cause analysis. On a separate dual damascene integration flow, we used VC metrology to capture different failure modes in the patterning process of metal trenches with tight T2T and corresponding overlapping vias.

Conclusions

We studied the impact of stochastic resist defects on electrical measurements of meander (MR) and fork-fork (FF) structures, and showed that large electrical test structures, built with a relatively simple patterning flow, can be used at the early stages of resist and patterning development, as the electrical failures are almost exclusively caused by the resist defects. In the dual damascene flow, we demonstrated that VC metrology is useful to determine the design rule parameters and capture different failure mechanisms.

Citation Download Citation

Sujan K. Sarkar, Sayantan Das, Victor M. Blanco Carballo, Philippe Leray, and Sandip Halder "Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study," Journal of Micro/Nanopatterning, Materials, and Metrology 21(4), 044901 (28 October 2022). https://doi.org/10.1117/1.JMM.21.4.044901

Received: 30 June 2022; Accepted: 29 September 2022; Published: 28 October 2022

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available