Presentation
8 June 2023 Investigation of E-field distribution and film material influence on laser-induced contamination (Conference Presentation)
Author Affiliations +
Abstract
Laser Induced Contamination (LIC) is one of the major issues in high energy high repetition rate laser systems. The growth of contamination during the operation of the laser influences the components spectral performance and can lead to the catastrophic damage. Several previous investigations indicate that LIC growth depends on the coatings material and even its deposition method. In our work, we investigate electron-beam deposited HR mirrors for the wavelength of 800 nm. Three different designs were tested in vacuum conditions under high repetition and high energy laser irradiation using femtosecond pulses. Two of the designs are based on quarter wavelength optical thickness (QWOT) layers: last layer of the first mirror is high refractive index film, hafnia in our case, and for the second mirrors the last layer was double QWOT of low refractive index film, silica in our case. For the last coating the E-field was modified by changing the last silica layer thickness. All samples were irradiated below the damage threshold level and LIC observed under confocal microscope. Analysis were obtained by comparing the influence of the last layer and E-field distribution within the multilayer coatings. Conclusions and recommendations for LIC reduction will be presented.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tomas Tolenis, Lukas Ramalis, Mojmír Havlík, Jan Hrebicek, Bedrich Rus, and Daniel Kramer "Investigation of E-field distribution and film material influence on laser-induced contamination (Conference Presentation)", Proc. SPIE PC12577, High-power, High-energy Lasers and Ultrafast Optical Technologies, PC125770A (8 June 2023); https://doi.org/10.1117/12.2669493
Advertisement
Advertisement
KEYWORDS
Contamination

Mirrors

Film thickness

Optical coatings

Refractive index

Silica

Laser systems engineering

RELATED CONTENT


Back to Top