Paper
22 July 2016 Design and construction of a 76m long-travel laser enclosure for a space occulter testbed
Author Affiliations +
Abstract
Princeton University is upgrading our space occulter testbed. In particular, we are lengthening it to ~76m to achieve flightlike Fresnel numbers. This much longer testbed required an all-new enclosure design. In this design, we prioritized modularity and the use of commercial off-the-shelf (COTS) and semi-COTS components. Several of the technical challenges encountered included an unexpected slow beam drift and black paint selection. Herein we describe the design and construction of this long-travel laser enclosure.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Galvin, Yunjong Kim, N. Jeremy Kasdin, Dan Sirbu, Robert Vanderbei, Dan Echeverri, Giuseppe Sagolla, Andreas Rousing, Kunjithapatham Balasubramanian, Daniel Ryan, Stuart Shaklan, and Doug Lisman "Design and construction of a 76m long-travel laser enclosure for a space occulter testbed", Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99126N (22 July 2016); https://doi.org/10.1117/12.2231093
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Switches

Laser safety

Reflectivity

Space telescopes

Sensors

Stray light

RELATED CONTENT

Smithsonian Widefield Infrared Camera
Proceedings of SPIE (July 09 2008)
X-ray telescopes for the ESA XMM spacecraft
Proceedings of SPIE (November 19 1998)
CCAT optics
Proceedings of SPIE (August 05 2010)
Mass producing an efficient NIR spectrograph
Proceedings of SPIE (September 30 2004)
Baffle design for a Cassegrain telescope
Proceedings of SPIE (November 30 2009)

Back to Top