Paper
27 April 2016 Active fiber polymer cladding temperature measurement under conditions of laser generation and amplification
V. E. Sypin, K. Yu. Prusakov, O. A. Ryabushkin
Author Affiliations +
Abstract
Polymer cladding temperature of active fiber in lasing regime is important parameter as it allows determination of fiber core temperature that in turn effects laser generation and amplification efficiency. Besides polymer cladding has much lower temperature damage threshold comparing to fused silica. For example, 200 degrees Kelvin overheating of the polymer cladding can result in fiber degradation. In present paper we introduce novel and simple method for precise temperature measurement of active fibers cladding under conditions of laser generation and amplification. Dependence of longitudinal temperature distribution along active fibers on optical pump power can be determined. This method employs measurement of temperature dependent electrical resistance of the metal wire being in thermal contact with fiber polymer cladding. The wire is reeled on the active fiber segment. Under lasing or amplification conditions the polymer cladding of the active fiber is heated together with coiled metal wire resulting in its electrical resistance change. By measuring resistance variation one can determine the temperature of the given fiber section.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. E. Sypin, K. Yu. Prusakov, and O. A. Ryabushkin "Active fiber polymer cladding temperature measurement under conditions of laser generation and amplification", Proc. SPIE 9886, Micro-Structured and Specialty Optical Fibres IV, 98861J (27 April 2016); https://doi.org/10.1117/12.2227752
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Polymers

Temperature metrology

Fiber lasers

Resistance

Fiber Bragg gratings

Metals

RELATED CONTENT

Bending artificial muscle from nylon filaments
Proceedings of SPIE (April 15 2016)
Passively cooled pump signal combiners at 2.1 kW for fiber...
Proceedings of SPIE (February 21 2020)
High-power 2-µm Tm3+-doped fibre lasers
Proceedings of SPIE (December 23 2004)

Back to Top