Fabrication and optical characterization of a 2D metal periodic grating structure for cold filter application

Atsushi Motogaito; Masanori Kito; Hideto Miyake; Kazumasa Hiramatsu

doi:10.1117/12.2201116

22 December 2015 Fabrication and optical characterization of a 2D metal periodic grating structure for cold filter application

Atsushi Motogaito, Masanori Kito, Hideto Miyake, Kazumasa Hiramatsu

Author Affiliations +

Proceedings Volume 9668, Micro+Nano Materials, Devices, and Systems; 96681Q (2015) https://doi.org/10.1117/12.2201116
Event: SPIE Micro+Nano Materials, Devices, and Applications, 2015, Sydney, New South Wales, Australia

Abstract

Cold filters, which simultaneously reflect infrared light and transmit visible light, prevent overheating in charge-coupled device cameras, microscopes, and other heat-sensitive equipment. This study proposes a cold filter based on a two dimensional (2D) metal periodic grating structure. Conventional dielectric multilayer films with abrupt filtering characteristics are undesirably affected by incident angle, temperature, and polarization. To solve these problems, a 2D metal periodic grating structure, which does not depend on the polarization, was applied. The grating structure comprises an Au layer and an electron beam resist layer, and was fabricated by electron beam lithography. The optical characteristics of this structure in the visible light region were measured by a spectrometer, and the optical properties were related to structural parameters of the double-layer, 2D grating structure. In particular, the reflectance over the entire visible light spectrum decreased at periods of 800 nm and 1 μm. The wavelengths of minimum and maximum reflectance were shifted by changing the spacing between the upper and lower metal layers from 270 to 370 nm. Simulation results suggested that the interference between the upper and lower layers and the surface plasmon resonance between the metal and resist layers occur simultaneously. Therefore, in the visible light region, the reflectance and transmission spectra were controlled by altering the structure of the 2D metal periodic grating.

Citation Download Citation

Atsushi Motogaito, Masanori Kito, Hideto Miyake, and Kazumasa Hiramatsu "Fabrication and optical characterization of a 2D metal periodic grating structure for cold filter application", Proc. SPIE 9668, Micro+Nano Materials, Devices, and Systems, 96681Q (22 December 2015); https://doi.org/10.1117/12.2201116

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE