Paper
23 October 2015 Mask process simulation for mask quality improvement
Nobuyasu Takahashi, So Goto, Dai Tsunoda, So-Eun Shin, Sukho Lee, Jungwook Shon, Jisoong Park
Author Affiliations +
Abstract
Demand for mask process correction (MPC) is growing facing the 14nm era. We have developed model based MPC and can generate mask contours by using this mask process model. This mask process model consists of EB (development) and etch, which employs a threshold (level set) model and a variable bias model respectively. The model calibration tool accepts both CD measurement results and SEM images. The simulation can generate mask image (contour), runs with distributed computing resources, and has scalable performance.

The contour simulation shows the accuracy of the MPC correction visually and provides comprehensive information about hot spots in mask fabrication. Additionally, it is possible to improve lithography simulation quality by providing a simulated mask contour.

In this paper, accuracy and computational performance of mask process simulation are shown. The focus is on the difference between the calibration methods using CDs or images.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nobuyasu Takahashi, So Goto, Dai Tsunoda, So-Eun Shin, Sukho Lee, Jungwook Shon, and Jisoong Park "Mask process simulation for mask quality improvement", Proc. SPIE 9635, Photomask Technology 2015, 96351G (23 October 2015); https://doi.org/10.1117/12.2196713
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Process modeling

Calibration

Error analysis

Computer simulations

Etching

Statistical modeling

Back to Top