Paper
19 March 2015 Spectral reflectance modeling of ZnO layers made with Atomic Layer Deposition for application in optical fiber Fabry-Perot interferometric sensors
Author Affiliations +
Abstract
Suitability of zinc oxide (ZnO) layers grown using Atomic Layer Deposition for operation in optical-fiber extrinsic Fabry-Perot sensors is investigated using a numerical model. Reflectance spectra obtained using the developed model indicate that the application of these layers in optical-fiber extrinsic Fabry-Perot sensors is difficult as it may require a source whose spectrum width is about 300 nm. A series of ZnO layers grown on end faces of SMF-28 fiber were prepared and their reflectance spectra were recorded by an optical spectrum analyser in order to verify the modelling results. The spectra contain a series of peaks not predicted by the model, which is attributed to two-mode propagation in the SMF-28 fiber connecting the ZnO layer with the rest of the measurement system.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paweł Wierzba and Małgorzata Jędrzejewska-Szczerska "Spectral reflectance modeling of ZnO layers made with Atomic Layer Deposition for application in optical fiber Fabry-Perot interferometric sensors", Proc. SPIE 9448, Saratov Fall Meeting 2014: Optical Technologies in Biophysics and Medicine XVI; Laser Physics and Photonics XVI; and Computational Biophysics, 944819 (19 March 2015); https://doi.org/10.1117/12.2179963
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zinc oxide

Reflectivity

Sensors

Atomic layer deposition

Fabry–Perot interferometry

Fabry–Perot interferometers

Optical fibers

Back to Top