Paper
4 March 2015 Interpolation method in simple computed tomography scanner
Author Affiliations +
Proceedings Volume 9302, International Conference on Experimental Mechanics 2014; 93020N (2015) https://doi.org/10.1117/12.2076910
Event: International Conference on Experimental Mechanics 2014, 2014, Singapore, Singapore
Abstract
A method for sinogram data interpolation based on a sinusoidal pattern in computed tomography has been developed. Sampled sinograms were acquired based on angular interval scanning of 5o, 10o, and 20o. Then each resulted sinogram was interpolated following sinusoidal pattern to make a complete full scanning sinogram as if they were sampled at 1o. After that, a formal summation convolved filtered back projection was applied to each sinogram to yield a crosssectional image. This method was successfully interpolated limited number of projections data to obtained complete sinogram. It works for simple and homogenous object. However, for high variation of physical properties, e.g. linear attenuation coefficient values, this method needs more consideration on interpolation strategies to produce good image.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gede A. Wiguna "Interpolation method in simple computed tomography scanner", Proc. SPIE 9302, International Conference on Experimental Mechanics 2014, 93020N (4 March 2015); https://doi.org/10.1117/12.2076910
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computed tomography

Image restoration

Radon

Scanners

Signal attenuation

Image filtering

Error analysis

Back to Top