Creating a transducer electronic datasheet using I2C serial EEPROM memory and PIC32-based microcontroller development board

Bogdan Croitoru; Adrian Tulbure; Mihail Abrudean; Mihai Secara

doi:10.1117/12.2070419

23 February 2015 Creating a transducer electronic datasheet using I2C serial EEPROM memory and PIC32-based microcontroller development board

Bogdan Croitoru, Adrian Tulbure, Mihail Abrudean, Mihai Secara

Author Affiliations +

Proceedings Volume 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII; 92580W (2015) https://doi.org/10.1117/12.2070419
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies 2014, 2014, Constanta, Romania

Abstract

The present paper describes a software method for creating / managing one type of Transducer Electronic Datasheet (TEDS) according to IEEE 1451.4 standard in order to develop a prototype of smart multi-sensor platform (with up to ten different analog sensors simultaneously connected) with Plug and Play capabilities over ETHERNET and Wi-Fi. In the experiments were used: one analog temperature sensor, one analog light sensor, one PIC32-based microcontroller development board with analog and digital I/O ports and other computing resources, one 24LC256 I2C (Inter Integrated Circuit standard) serial Electrically Erasable Programmable Read Only Memory (EEPROM) memory with 32KB available space and 3 bytes internal buffer for page writes (1 byte for data and 2 bytes for address). It was developed a prototype algorithm for writing and reading TEDS information to / from I2C EEPROM memories using the standard C language (up to ten different TEDS blocks coexisting in the same EEPROM device at once). The algorithm is able to write and read one type of TEDS: transducer information with standard TEDS content. A second software application, written in VB.NET platform, was developed in order to access the EEPROM sensor information from a computer through a serial interface (USB).

Citation Download Citation

Bogdan Croitoru, Adrian Tulbure, Mihail Abrudean, and Mihai Secara "Creating a transducer electronic datasheet using I2C serial EEPROM memory and PIC32-based microcontroller development board", Proc. SPIE 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII, 92580W (23 February 2015); https://doi.org/10.1117/12.2070419

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE