Paper
4 August 2014 Error reduction and modeling for hexapod positioners of secondary mirrors for large ground-based telescopes
Author Affiliations +
Abstract
The positioning requirements for secondary mirrors and instruments for large ground-based telescopes are becoming increasingly challenging. Modern telescope designs, such as LSST and TMT, are specifying repeatability and/or absolute accuracy limits below 10 μm and 10 μrad for the hexapod positioning systems generally used for these applications. Hexapod error sources, including lead screw pitch variations, windup, backlash, friction, thermal expansion, compliance, sensing, and joint node location uncertainties, are examined along with methods for reducing or eliminating these errors by mechanical means or through calibration. Alternative sensing approaches are discussed and their relative benefits are evaluated. Finally, a model-based design approach is presented for conducting initial design trade studies, assessing technical risk, predicting achievable performance, establishing subsystem and component requirements, and tracking positioning error budgets through the entire development process. A parametric actuator model and its initial results are described, and testing approaches are outlined to identify key model parameters and verify subsystem and component performance.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryan C. Sneed and Paul J. Keas "Error reduction and modeling for hexapod positioners of secondary mirrors for large ground-based telescopes", Proc. SPIE 9150, Modeling, Systems Engineering, and Project Management for Astronomy VI, 915020 (4 August 2014); https://doi.org/10.1117/12.2056644
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Sensors

Systems modeling

Performance modeling

Mirrors

Telescopes

Computer programming

RELATED CONTENT

Adaptive periodic error correction for the VLT
Proceedings of SPIE (February 04 2003)
Figure Control Concepts For Segmented Reflector Telescopes
Proceedings of SPIE (September 20 1989)
Magnetohydrodynamic inertial reference system
Proceedings of SPIE (July 07 2000)
Actuators For A Segmented Mirror Control System
Proceedings of SPIE (November 03 1983)
Autoguider servo design and testing of the W. M. Keck...
Proceedings of SPIE (March 21 1997)

Back to Top