Paper
10 June 2014 Analysis of nonstandard and home-made explosives and post-blast residues in forensic practice
Marek Kotrlý, Ivana Turková
Author Affiliations +
Abstract
Nonstandard and home-made explosives may constitute a considerable threat and as well as a potential material for terrorist activities. Mobile analytical devices, particularly Raman, or also FTIR spectrometers are used for the initial detection. Various sorts of phlegmatizers (moderants) to decrease sensitivity of explosives were tested, some kinds of low viscosity lubricants yielded very good results. If the character of the substance allows it, phlegmatized samples are taken in the amount of approx.0.3g for a laboratory analysis. Various separation methods and methods of concentrations of samples from post-blast scenes were tested. A wide range of methods is used for the laboratory analysis. XRD techniques capable of a direct phase identification of the crystalline substance, namely in mixtures, have highly proved themselves in practice for inorganic and organic phases. SEM-EDS/WDS methods are standardly employed for the inorganic phase. In analysing post-blast residues, there are very important techniques allowing analysis at the level of separate particles, not the overall composition in a mixed sample.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marek Kotrlý and Ivana Turková "Analysis of nonstandard and home-made explosives and post-blast residues in forensic practice", Proc. SPIE 9073, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XV, 90730U (10 June 2014); https://doi.org/10.1117/12.2050121
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Explosives

Capillaries

Scanning electron microscopy

Carbon

Liquids

Solids

Back to Top