Paper
7 March 2014 Fiber amplifiers under thermal loads leading to transverse mode instability
Mette M Johansen, Kristian R. Hansen, Thomas T. Alkeskjold, Jesper Lægsgaard
Author Affiliations +
Abstract
Transverse mode instability (TMI) in rare-earth doped fiber amplifiers operating above an average power threshold is caused by intermodal stimulated thermal Rayleigh scattering due to quantum defect heating. We investigate thermally induced longitudinal waveguide perturbations causing power transfer from the fundamental mode (FM) to the higher order mode (HOM) by a nonlinear gain, which depends on the FM-HOM frequency shift and position along the fiber. We take temperature and mode profile evolution along the fiber into consideration to engineer fiber designs with increased TMI threshold and operation stability at higher average powers.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mette M Johansen, Kristian R. Hansen, Thomas T. Alkeskjold, and Jesper Lægsgaard "Fiber amplifiers under thermal loads leading to transverse mode instability", Proc. SPIE 8961, Fiber Lasers XI: Technology, Systems, and Applications, 89612P (7 March 2014); https://doi.org/10.1117/12.2037687
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Fermium

Frequency modulation

Cladding

Absorption

Refractive index

Waveguides

Back to Top