Paper
1 April 2013 Deep ultraviolet out-of-band characterization of EUVL scanners and resists
Author Affiliations +
Abstract
As Extreme Ultraviolet Lithography (EUVL) gets closer to production, an increasing interest is devoted to Deep Ultraviolet Out-of-Band (DUV OoB). In fact, EUV sources are known to emit a broad spectrum of wavelengths, among which DUV could potentially contribute to the exposure and degrade imaging performance. In this paper, the DUV/EUV ratio in pre-production (ASML NXE:3100) and alpha (ASML ADT) EUVL scanners is investigated. The OoB is quantified using a previously proposed methodology [1] based on the use of an aluminum-coated mask capable to provide quantitative in situ information on DUV/EUV ratio without disrupting the tool. The OoB sensitivity of an extensive set of resists is estimated in order to properly guide material development. The impact of OoB on imaging and on Intra-Field Critical Dimension Uniformity (IF CDU) is quantified using resists with large differences in OoB sensitivity. In addition, the impact of mask design on OoB is also investigated. The results indicated that it is in fact possible to reduce the OoB sensitivity of a resist (from 2.5 down to 0.3%) without compromising imaging performance and that tool OoB qualification and monitoring are critical in a production environment.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gian F. Lorusso, Tasaku Matsumiya, Jun Iwashita, Taku Hirayama, and Eric Hendrickx "Deep ultraviolet out-of-band characterization of EUVL scanners and resists", Proc. SPIE 8679, Extreme Ultraviolet (EUV) Lithography IV, 86792V (1 April 2013); https://doi.org/10.1117/12.2011119
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Deep ultraviolet

Photomasks

Aluminum

Extreme ultraviolet lithography

Scanners

Extreme ultraviolet

Reflectivity

RELATED CONTENT

Black border, mask 3D effects covering challenges of EUV...
Proceedings of SPIE (October 17 2014)
Impact of an etched EUV mask black border on imaging...
Proceedings of SPIE (October 03 2013)
Novel EUV mask black border and its impact on wafer...
Proceedings of SPIE (March 18 2016)
EUVL mask performance and optimization
Proceedings of SPIE (April 16 2012)
Results from a novel EUV mask inspection by 193nm DUV...
Proceedings of SPIE (April 01 2010)

Back to Top