Paper
26 November 2012 Beam splitters of metal-dielectric reflective gratings
Anduo Hu, Changhe Zhou, Hongchao Cao, Jun Wu, Jia Wei
Author Affiliations +
Abstract
Beam splitters are important optical components. In this paper, reflective 1×2 and 1×3 beam splitters based on metaldielectric gratings are designed at wavelength of 1064 nm for TE polarization. Alumina, silver, alumina and fused silica films are coated on substrate in sequence. On the top fused silica film, grating with rectangular grooves are etched. Rigorous coupled-wave analysis (RCWA) and simulated annealing (SA) algorithm are employed to optimize grating parameters such as period, depth, thickness of connecting layer and incident angle. An optimized 1×2 beam splitter can achieve perpendicular beam splitting with diffraction efficiency of 49.2% at the -1st order and 49.1% at the 0th order for incident angle of 30°. When incident angle is 5°, the diffraction efficiencies of the optimized 1×3 beam splitter are 32.66% at the -1st order, 32.71% at the 0th order and 32.72% at the 1st order. To guide the fabrication and operation of beam splitters, the tolerance of grating period, depth, thickness of connecting layer are calculated. The optimized 1×2 and 1×3 beam splitters exhibit high efficiencies and uniformity, which should be useful in applications.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anduo Hu, Changhe Zhou, Hongchao Cao, Jun Wu, and Jia Wei "Beam splitters of metal-dielectric reflective gratings", Proc. SPIE 8556, Holography, Diffractive Optics, and Applications V, 85560Y (26 November 2012); https://doi.org/10.1117/12.999299
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam splitters

Diffraction gratings

Diffraction

Reflectivity

Optical design

Silver

Silica

Back to Top