Paper
8 November 2012 Linear time EUV blank defect mitigation algorithm considering tolerance to inspection inaccuracy
Yuelin Du, Hongbo Zhang, Martin D. F. Wong
Author Affiliations +
Abstract
Extreme ultraviolet lithography (EUVL) is a leading candidate for next generation lithography (NGL). At 11nm technology node, the size of the minimum printable multi-layer (ML) mask defect is as small as 20nm. As a result, it is extremely difficult to produce defect-free ML mask blanks. Instead, by allowing a certain number of printable defects on the blank, the EUVL cost of ownership can be tremendously reduced. However, those printable blank defects must be mitigated later in the mask fabrication process in order not to sacrifice yield. One effective defect mitigation approach is to cover the defects by device patterns, such that the defects will no longer be printable. However, there can be billions of device patterns in one single layer which have to be shifted together within a certain margin due to the exposure alignment requirement. Thus an efficient way to cover all defects simultaneously via global device pattern shifting is sorely needed. In addition, it is very difficult to measure the position of each defect accurately with the current blank inspection tool, so the defect position inaccuracy has to be taken into consideration at the same time. This paper formulates the blank defect coverage problem into a rectilinear polygon shrinking and intersection problem and develops a highly efficient algorithm whose time complexity is linear with respect to the density of device patterns. In addition, within the shift margin there are usually multiple positions to locate a layout on a defective blank where all defects are simultaneously covered by the device patterns; our algorithm is able to report the optimal layout location with the maximum tolerance for the inspection inaccuracy.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuelin Du, Hongbo Zhang, and Martin D. F. Wong "Linear time EUV blank defect mitigation algorithm considering tolerance to inspection inaccuracy", Proc. SPIE 8522, Photomask Technology 2012, 85221R (8 November 2012); https://doi.org/10.1117/12.964103
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tolerancing

Inspection

Extreme ultraviolet lithography

Algorithm development

Extreme ultraviolet

Photomasks

Mask making

RELATED CONTENT

Actinic patterned mask defect inspection for EUV lithography
Proceedings of SPIE (November 25 2019)
Mask readiness for EUVL pilot line
Proceedings of SPIE (April 16 2012)
EUV mask preparation considering blank defects mitigation
Proceedings of SPIE (October 13 2011)

Back to Top