Paper
24 October 2012 Preliminary results on Bridgman grown CdZnTe detector crystals assisted by ampoule rotation
Author Affiliations +
Abstract
Different rotation profiles were applied to the ampoule during Vertical Bridgman (VB) growth of Cd0.9Zn0.1Te (CZT) for enhancing compositional homogeneity, minimizing radial and axial segregation and stabilizing growth interface. The radial Zinc (Zn) segregation was significantly minimized. Improvements in the axial Zn segregation were also noticeable. The modifications in interface shapes during the growth were prominent from the photoluminescence (PL) studies. Improved grain structure was observed with growths containing lower (0.5 wt. %) initial excess Te; however with higher amount of initial excess Te (7.5 wt. %) high resistivity ingots with improved carrier properties were grown consistently but with lower single crystal yield. With more intense rotations, resistivity values within the ingot varied by an order of magnitude showing non uniformity in distribution of dopants.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amlan Datta, Santosh Swain, Yunlong Cui, Arnold Burger, and Kelvin Lynn "Preliminary results on Bridgman grown CdZnTe detector crystals assisted by ampoule rotation", Proc. SPIE 8507, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XIV, 850711 (24 October 2012); https://doi.org/10.1117/12.930437
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Interfaces

Tellurium

Zinc

Sensors

Infrared cameras

Supercooling

Back to Top