Paper
13 September 2012 Optimizing optical systems with active components
Author Affiliations +
Abstract
The increasing requirement on the performance of optical instruments leads to more complex optical systems including active optical components. The role of these components is to correct for environmental influences on the instrument and reduce manufacturing and alignment residuals. We describe a method that can be used to design and operate instruments with active components that are not necessarily located in the pupil. After the optical system is designed, the next step is to analyse the available degrees of freedom (DOF), select the best set and include them in the active component. By performing singular value decomposition (SVD) and regularization of the sensitivity matrix, the most efficient DOF for the active component can be calculated. In operation of the instrument, the wavefront at the pupil plane is reconstructed from phase diversity (PD); a metrology having minimal impact on instrument design. Information from SVD, forward and reverse optimization are used to model the process, explore the parameter space and acquire knowledge on convergence. The results are presented for a specific problem.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tibor Agócs, Lars Venema, Visa Korkiakoski, and Gabby Kroes "Optimizing optical systems with active components", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84505F (13 September 2012); https://doi.org/10.1117/12.925326
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optimization (mathematics)

Wavefronts

Mirrors

Optical components

Spectrographs

Active optics

Matrices

Back to Top