Paper
31 May 2012 Development of low excess noise SWIR APDs
Author Affiliations +
Abstract
There is a strong interest in developing sensitive Short Wavelength Infrared (SWIR) avalanche photodiodes (APDs) for applications like eye safe laser ranging and robotic vision. The excess noise associated with the avalanche process is critical in dictating the sensitivity of APDs. InGaAs APDs that are commonly used in the SWIR region have either InP or InAlAs as an avalanche layer and these materials have excess noise factor of 0.5 and 0.22, respectively. Earlier, Spectrolab had developed APDs with impact ionization engineering (I2E) structures based on InAlAs and InGaAlAs heterostructures as avalanche layers. These I2E APDs showed an excess noise factor of 0.15. A photoreceiver based on the I2E APD exhibited an noise equivalent power (NEP) of 150 fW/rt(Hz) over 1 GHz bandwidth at 1.06 μm. In this paper, a new multiplier structure based on multiple stages of I2E is studied. The APDs show optical gains over 100 before device breakdown. The increased gain and low excess noise will improve the sensitivity of InGaAs APDs based photoreceivers.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaogang Bai, Ping Yuan, Paul McDonald, Joseph Boisvert, James Chang, Rengarajan Sudharsanan, Michael Krainak, Guangning Yang, Xiaoli Sun, Wei Lu, Zhiwen Lu, Qiugui Zhou, Wenlu Sun, and Joe Campbell "Development of low excess noise SWIR APDs", Proc. SPIE 8353, Infrared Technology and Applications XXXVIII, 83532H (31 May 2012); https://doi.org/10.1117/12.919397
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Avalanche photodetectors

Short wave infrared radiation

Indium gallium arsenide

Ionization

Silicon

Photodetectors

Avalanche photodiodes

Back to Top