Paper
6 April 2012 Miniature fiber optic temperature sensor for concrete structural health monitoring
Author Affiliations +
Abstract
This paper presents a miniature fiber optic temperature sensor and its application in concrete structural health monitoring. The temperature sensor is based on Fabry-Perot (FP) principle. The endface of the fiber was wet etched. A piece of borosilicate glass was thermally deposited into the cavity on the etched endface to form an FP cavity. Temperature calibration experiments were performed. A sensor with 30 μm microcavity length was demonstrated to have a sensitivity of 0.006 nm/°C and linearity coefficient of 0.99. During the early-age of concreting, the sensor was embedded in the concrete structure to monitor the temperature change caused by the exothermic chemical reaction between the cement and water. The dramatically increased temperature inside the structure was directly related to its future structural health. During the concrete hydration experiment, the measured peak temperature of concrete specimens was 59.7 °C 12.5 hour after concrete casting.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaotian Zou, Alice Chao, Nan Wu, Ye Tian, Tzu-Yang Yu, and Xingwei Wang "Miniature fiber optic temperature sensor for concrete structural health monitoring", Proc. SPIE 8345, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2012, 83454V (6 April 2012); https://doi.org/10.1117/12.915265
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Temperature sensors

Fiber optics

Sensors

Borosilicate glass

Cements

Structural health monitoring

Back to Top