Paper
2 June 2012 The research on the micro-processing-used all-solid-state picosecond laser
Zhen-xu Bai, Qing-kang Ai, Jin-peng Duan, Meng Chen, Gang Li
Author Affiliations +
Proceedings Volume 8334, Fourth International Conference on Digital Image Processing (ICDIP 2012); 83340K (2012) https://doi.org/10.1117/12.946044
Event: Fourth International Conference on Digital Image Processing (ICDIP 2012), 2012, Kuala Lumpur, Malaysia
Abstract
A micro processing used LD end-pumped Nd:YVO4 all solid-state picosecond pulse laser was demonstrated under the semiconductor saturable absorption mirror(SESAM) mode-locking technology and regeneration amplifier technology, by using BBO crystal as electro-optic crystal and diode-side-pumped Nd:YAG. 1064nm laser was obtained with 1.47mJ single pulse energy, 15ps pulse width at 1 kHz repetition rate and the pulse energy fluctuation was less than 0.6% in 3 hours operation. Finally, through the galvanometric we got the beam focused, realizing the steel plate processing which thickness was 0.5mm and the aperture radius was 25.5μm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhen-xu Bai, Qing-kang Ai, Jin-peng Duan, Meng Chen, and Gang Li "The research on the micro-processing-used all-solid-state picosecond laser", Proc. SPIE 8334, Fourth International Conference on Digital Image Processing (ICDIP 2012), 83340K (2 June 2012); https://doi.org/10.1117/12.946044
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picosecond phenomena

Pulsed laser operation

Mode locking

Laser processing

Optical amplifiers

Laser applications

Semiconductor lasers

RELATED CONTENT

885nm-LD end-pumped burst-mode laser
Proceedings of SPIE (December 16 2022)
Femtosecond diode-pumped mode-locked neodymium lasers
Proceedings of SPIE (December 23 2016)

Back to Top