Paper
7 February 2012 Tuning the refractive index of blended polymer films by RIR-MAPLE deposition
Ryan D. McCormick, Eric D. Cline, Arvinder S. Chadha, Weidong Zhou, Adrienne D. Stiff-Roberts
Author Affiliations +
Abstract
Graded index polymer films enable novel optics using rigid or flexible substrates, such as waveguides or anti-reflection coatings. Previously, such films have been fabricated by nanoimprint lithography or the decomposition of a single component in polymer blends. Yet, it is desirable to have precise control over the polymer film composition in order to have the most flexibility in designing refractive index profiles. Resonant-infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a polymer thin film deposition technique that enables multi-layer structures on a wide variety of substrate materials, regardless of the solubilities of constituent polymers. In this work, the feasibility of tuning the refractive index of blended polymer films of polystyrene and poly(methyl methacrylate) deposited by RIR-MAPLE is demonstrated. Different polymer blend film compositions are deposited using RIR-MAPLE by varying the polymer target ratio. Transmission electron microscopy and atomic force microscopy are used to characterize the film morphology.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryan D. McCormick, Eric D. Cline, Arvinder S. Chadha, Weidong Zhou, and Adrienne D. Stiff-Roberts "Tuning the refractive index of blended polymer films by RIR-MAPLE deposition", Proc. SPIE 8258, Organic Photonic Materials and Devices XIV, 825806 (7 February 2012); https://doi.org/10.1117/12.906878
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Polymer thin films

Polymethylmethacrylate

Picosecond phenomena

Refractive index

Atomic force microscopy

Photorefractive polymers

Back to Top