Paper
13 October 2011 Dry etching technologies for the advanced binary film
Yoshinori Iino, Makoto Karyu, Hirotsugu Ita, Tomoaki Yoshimori, Hidehito Azumano, Makoto Muto, Mikio Nonaka
Author Affiliations +
Abstract
ABF (Advanced Binary Film) developed by Hoya as a photomask for 32 (nm) and larger specifications provides excellent resistance to both mask cleaning and 193 (nm) excimer laser and thereby helps extend the lifetime of the mask itself compared to conventional photomasks and consequently reduces the semiconductor manufacturing cost [1,2,3]. Because ABF uses Ta-based films, which are different from Cr film or MoSi films commonly used for photomask, a new process is required for its etching technology. A patterning technology for ABF was established to perform the dry etching process for Ta-based films by using the knowledge gained from absorption layer etching for EUV mask that required the same Ta-film etching process [4]. Using the mask etching system ARES, which is manufactured by Shibaura Mechatronics, and its optimized etching process, a favorable CD (Critical Dimension) uniformity, a CD linearity and other etching characteristics were obtained in ABF patterning. Those results are reported here.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshinori Iino, Makoto Karyu, Hirotsugu Ita, Tomoaki Yoshimori, Hidehito Azumano, Makoto Muto, and Mikio Nonaka "Dry etching technologies for the advanced binary film", Proc. SPIE 8166, Photomask Technology 2011, 81663W (13 October 2011); https://doi.org/10.1117/12.898976
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Photomasks

Critical dimension metrology

Dry etching

Optical lithography

Binary data

Mechatronics

RELATED CONTENT

Dry etching technologies for Cr film
Proceedings of SPIE (June 12 2018)
The possibility of CrOx as the top coating material on...
Proceedings of SPIE (November 08 2005)
Fabrication of phase-shifting mask
Proceedings of SPIE (July 01 1991)
AIMS-fab SPEC for defect repair and better repair profile
Proceedings of SPIE (December 06 2004)
Achieving 65 nm design rule dry etch performance a...
Proceedings of SPIE (August 20 2004)

Back to Top