Hybrid light source for scanning white light interferometry-based MEMS quality control

V. Heikkinen; K. Hanhijärvi; J. Aaltonen; H. Räikkönen; B. Wälchli; T. Paulin; I. Kassamakov; K. Grigoras; S. Franssila; E. Hæggström

doi:10.1117/12.889362

27 May 2011 Hybrid light source for scanning white light interferometry-based MEMS quality control

V. Heikkinen, K. Hanhijärvi, J. Aaltonen, H. Räikkönen, B. Wälchli, T. Paulin, I. Kassamakov, K. Grigoras, S. Franssila, E. Hæggström

Author Affiliations +

Proceedings Volume 8082, Optical Measurement Systems for Industrial Inspection VII; 80822O (2011) https://doi.org/10.1117/12.889362
Event: SPIE Optical Metrology, 2011, Munich, Germany

Abstract

We apply a hybrid light source with adjustable spectrum to Scanning White Light Interferometric MEMS device characterization. The source combines light from a blue laser (409 nm), a fluorescent material (emission peak 521 nm), amber LED (597 nm) and cyan LED (505 nm) to cover the visible wavelengths. The Gaussian spectrum of the light source reduces interference ringing and improves surface localization, which is important when imaging diffuse surfaces or layered structures. The new light source allows both stroboscopic illumination and spectrum shaping during a measurement. Changing the illumination spectrum allows one to maximize the reflection from the measured surface - compared to reflections from other surfaces - as a mean to improve signal-to-noise-ratio. To validate the source we measured static MEMS samples featuring known step heights using the light source at three different mean wavelengths (508 nm, 524 nm and 579 nm). The measured step heights (7.029 ± 0.045 μm, 7.002 ± 0.041 μm and 7.005 ± 0.056 μm) were close to those measured using a halogen lamp (7.025 ± 0.020 μm). Interferograms without the side lobes typical for white LEDs were achieved. The FWHM of the interferogram of the combined light source was (1.859 ± 0.008 μm).

Citation Download Citation

V. Heikkinen, K. Hanhijärvi, J. Aaltonen, H. Räikkönen, B. Wälchli, T. Paulin, I. Kassamakov, K. Grigoras, S. Franssila, and E. Hæggström "Hybrid light source for scanning white light interferometry-based MEMS quality control", Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80822O (27 May 2011); https://doi.org/10.1117/12.889362

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available